|
Re: MSD Controller Harness
[Re: STEFF]
#2099964
06/28/16 02:00 PM
06/28/16 02:00 PM
|
Joined: Jan 2003
Posts: 6,266 Renton Washington
Triple Threat
master
|
master
Joined: Jan 2003
Posts: 6,266
Renton Washington
|
Buy the later coils and the proper harness for the MSD and you're good. You'll also need the later valve covers as well. Agreed
-Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA
|
|
|
Re: MSD Controller Harness
[Re: RTSE4ME]
#2100273
06/28/16 11:26 PM
06/28/16 11:26 PM
|
Joined: Jun 2015
Posts: 29 NJ, USA
Hemijoejr
member
|
member
Joined: Jun 2015
Posts: 29
NJ, USA
|
I just bought one for the early coils and installed it no more than 2 weeks ago. They are not listed on Summit Racing any more. Just the later setup. I ordered mine off of EBay and it was drop shipped from MSD.
Stock Displacement, pump gas, 5.7L Gen 3 Hemi, early 5.7L heads, 3670lbs with driver, Best time and MPH 11.11@120.9MPH
|
|
|
Re: MSD Controller Harness
[Re: Hemijoejr]
#2100291
06/28/16 11:54 PM
06/28/16 11:54 PM
|
Joined: Jan 2003
Posts: 2,045 MD
RTSE4ME
OP
top fuel
|
OP
top fuel
Joined: Jan 2003
Posts: 2,045
MD
|
Buy the later coils and the proper harness for the MSD and you're good. You'll also need the later valve covers as well. Thanks Steff Can I use 06-08 valve covers on Eagle heads? Or do I need the 09 and later valve covers? I just bought one for the early coils and installed it no more than 2 weeks ago. They are not listed on Summit Racing any more. Just the later setup. I ordered mine off of EBay and it was drop shipped from MSD. If I keep the early coils can they be used when I swap to Eagle heads? The old harness is still available on ebay but it is no longer on MSD site. Trying to figure out which way to go without having buy things twice.
|
|
|
Re: MSD Controller Harness
[Re: RTSE4ME]
#2100434
06/29/16 08:48 AM
06/29/16 08:48 AM
|
Joined: Jun 2015
Posts: 29 NJ, USA
Hemijoejr
member
|
member
Joined: Jun 2015
Posts: 29
NJ, USA
|
No, you need Eagle specific valve covers due to the updated valve train geometry and they require the later style coils.
Stock Displacement, pump gas, 5.7L Gen 3 Hemi, early 5.7L heads, 3670lbs with driver, Best time and MPH 11.11@120.9MPH
|
|
|
Re: MSD Controller Harness
[Re: RTSE4ME]
#2101161
06/30/16 03:19 PM
06/30/16 03:19 PM
|
Joined: Jan 2003
Posts: 6,266 Renton Washington
Triple Threat
master
|
master
Joined: Jan 2003
Posts: 6,266
Renton Washington
|
Buy the later coils and the proper harness for the MSD and you're good. You'll also need the later valve covers as well. Thanks Steff Can I use 06-08 valve covers on Eagle heads? Or do I need the 09 and later valve covers? I am using 06-08 valve covers and coils on my Apache headed 392. Some trimming was required to the internal braces.
-Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA
|
|
|
|
|
|