|
converter balance weights?
#1882900
08/01/15 03:20 PM
08/01/15 03:20 PM
|
Joined: Jun 2005
Posts: 163 Iowa,US
4bbl
OP
member
|
OP
member
Joined: Jun 2005
Posts: 163
Iowa,US
|
Just had a new motor built, its internal balanced. balancer has no weights added. Motor was installed by others. previous motor was stock rotating assembly so converter has weights. Do i need to remove the converter weights before I run/drive or wait to see if there is vibrations. Motor is built high HP and RPM.
4bbl
If you can't hear it coming what's the point.......
|
|
|
Re: converter balance weights?
[Re: 4bbl]
#1882919
08/01/15 04:08 PM
08/01/15 04:08 PM
|
Joined: Oct 2003
Posts: 7,506 Az
Crizila
master
|
master
Joined: Oct 2003
Posts: 7,506
Az
|
Gotta remove the weights from the convertor and run a flex plate and damper for an internal balance motor.
Fastest 300
|
|
|
Re: converter balance weights?
[Re: Crizila]
#1882986
08/01/15 05:58 PM
08/01/15 05:58 PM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Gotta remove the weights from the convertor and run a flex plate and damper for an internal balance motor. Yep.. knock the weight off the conv and change to a zero flex plate EDIT Also check the balancer for no extra weight
Last edited by MR_P_BODY; 08/01/15 05:59 PM.
|
|
|
Re: converter balance weights?
[Re: 4bbl]
#1883039
08/01/15 07:18 PM
08/01/15 07:18 PM
|
Joined: Jan 2003
Posts: 25,871 Rio Linda, CA
John_Kunkel
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 25,871
Rio Linda, CA
|
Do i need to remove the converter weights before I run/drive or wait to see if there is vibrations. Depends on where the weights are located; thin weights on the outer periphery are for mass balancing and must stay in place but weights on the engine side of the converter are for external balancing...those must be removed.
The INTERNET, the MISinformation superhighway
|
|
|
Re: converter balance weights?
[Re: 4bbl]
#1883562
08/02/15 03:04 PM
08/02/15 03:04 PM
|
Joined: Jan 2005
Posts: 866 Winnipeg ,Mb. CA.
chryco
super stock
|
super stock
Joined: Jan 2005
Posts: 866
Winnipeg ,Mb. CA.
|
B & M Zero balance flex plate .
Gas is fer washin' parts ....Alky`s fer drinkin' ...Nitro`s fer Racin'!
|
|
|
|
|
|