|
Re: 04 2500 AC
[Re: bonefish]
#1868923
07/12/15 06:48 PM
07/12/15 06:48 PM
|
Joined: Jan 2003
Posts: 524 Mesa, AZ
Bill_T
mopar
|
mopar
Joined: Jan 2003
Posts: 524
Mesa, AZ
|
You are probably not looking at the low side port (the high side is the one out front where it is nice and convenient). The low side is way back up under the cowl near the firewall on the receiver dryer. It is a PIA to get the hose seated. Use caution....
This space not for rent.
|
|
|
Re: 04 2500 AC
[Re: Bill_T]
#1869027
07/12/15 10:04 PM
07/12/15 10:04 PM
|
Joined: Jan 2003
Posts: 8,677 Buford, GA
I_bleed_MOPAR
master
|
master
Joined: Jan 2003
Posts: 8,677
Buford, GA
|
You are probably not looking at the low side port (the high side is the one out front where it is nice and convenient). The low side is way back up under the cowl near the firewall on the receiver dryer. It is a PIA to get the hose seated. Use caution....
^^^^ This. And it's even worse when it's a 4x4. Tim
'71 Charger 383/727 '17 Challenger SXT (Wifeys car )
|
|
|
Re: 04 2500 AC
[Re: I_bleed_MOPAR]
#1869061
07/12/15 10:55 PM
07/12/15 10:55 PM
|
Joined: Nov 2004
Posts: 7,274 s.w.fl
bonefish
OP
master
|
OP
master
Joined: Nov 2004
Posts: 7,274
s.w.fl
|
its the one way in the back and it has a grey cap on it marked with a L.so far ive measured 4 other cars including a Dakota and a f-150,they are all the same and the nozzle fits them all.
Last edited by bonefish; 07/13/15 10:02 AM.
|
|
|
Re: 04 2500 AC
[Re: bonefish]
#1869287
07/13/15 10:53 AM
07/13/15 10:53 AM
|
Joined: Jan 2003
Posts: 8,677 Buford, GA
I_bleed_MOPAR
master
|
master
Joined: Jan 2003
Posts: 8,677
Buford, GA
|
Strange. I checked mine when the clutch went out. It was a royal pain to get it on the fitting with my big paws. Tim
'71 Charger 383/727 '17 Challenger SXT (Wifeys car )
|
|
|
Re: 04 2500 AC
[Re: bonefish]
#1869356
07/13/15 12:41 PM
07/13/15 12:41 PM
|
Joined: Jan 2003
Posts: 8,677 Buford, GA
I_bleed_MOPAR
master
|
master
Joined: Jan 2003
Posts: 8,677
Buford, GA
|
Mine is different (being an '06, I guess) as the port is on top of the receiver-drier. I wish mine was out in the open like that. Do you have a full set of gauges or just the recharge kit? If it's just the kit hose someone may have changed it to a high-side connector. Tim
'71 Charger 383/727 '17 Challenger SXT (Wifeys car )
|
|
|
Re: 04 2500 AC
[Re: bonefish]
#1869397
07/13/15 02:18 PM
07/13/15 02:18 PM
|
Joined: Jan 2003
Posts: 8,677 Buford, GA
I_bleed_MOPAR
master
|
master
Joined: Jan 2003
Posts: 8,677
Buford, GA
|
It has me stumped. Found some pictures online and the line, port, and cap look just like yours. Wish you were closer, I'd be glad to take a look at it. Tim
'71 Charger 383/727 '17 Challenger SXT (Wifeys car )
|
|
|
|
|
|