5.9 Magnum rod bearing question?
#180606
01/01/09 05:21 PM
01/01/09 05:21 PM
|
Joined: Jan 2003
Posts: 1,263 Southwestern Ontario Canada
racealittle
OP
pro stock
|
OP
pro stock
Joined: Jan 2003
Posts: 1,263
Southwestern Ontario Canada
|
I pulled a rod bearing to inspect from a 1999 RT motor. The marking says "12 98 D, DA 49"
So how do I read this to determine what the bearing size is? Would Clevite 77's from Mancini be adequate replacement? I don't like the look of the bearing and thirty some dollars for a set are cheap insurance.
Too many cars, too many parts, too little coin, too little space to work in, too little time left to make it all happen!
Update: down to one ride, still too many parts, a little more jingle in the pocket, gaining space, and it's going to happen this year!
|
|
|
Re: 5.9 Magnum rod bearing question?
[Re: racealittle]
#180607
01/01/09 05:30 PM
01/01/09 05:30 PM
|
Joined: Jan 2003
Posts: 9,826 las vegas
70AARcuda
master
|
master
Joined: Jan 2003
Posts: 9,826
las vegas
|
mike the rod journal to find out the size...
12 98...date of manufacture for the bearing...which fits a 99 engine..
u should see on the other end of the bearing...
std..for standard ...or .010..of undersize journal
Tony
70 AARCuda Vitamin C 71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield) 71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas) 71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)
|
|
|
Re: 5.9 Magnum rod bearing question?
[Re: 70AARcuda]
#180608
01/01/09 05:39 PM
01/01/09 05:39 PM
|
Joined: Jan 2003
Posts: 1,263 Southwestern Ontario Canada
racealittle
OP
pro stock
|
OP
pro stock
Joined: Jan 2003
Posts: 1,263
Southwestern Ontario Canada
|
There are no other markings.
Too many cars, too many parts, too little coin, too little space to work in, too little time left to make it all happen!
Update: down to one ride, still too many parts, a little more jingle in the pocket, gaining space, and it's going to happen this year!
|
|
|
Re: 5.9 Magnum rod bearing question?
[Re: racealittle]
#180609
01/01/09 05:40 PM
01/01/09 05:40 PM
|
Joined: Jan 2003
Posts: 1,263 Southwestern Ontario Canada
racealittle
OP
pro stock
|
OP
pro stock
Joined: Jan 2003
Posts: 1,263
Southwestern Ontario Canada
|
Too many cars, too many parts, too little coin, too little space to work in, too little time left to make it all happen!
Update: down to one ride, still too many parts, a little more jingle in the pocket, gaining space, and it's going to happen this year!
|
|
|
Re: 5.9 Magnum rod bearing question?
[Re: racealittle]
#180610
01/01/09 05:41 PM
01/01/09 05:41 PM
|
Joined: Jan 2003
Posts: 1,263 Southwestern Ontario Canada
racealittle
OP
pro stock
|
OP
pro stock
Joined: Jan 2003
Posts: 1,263
Southwestern Ontario Canada
|
Too many cars, too many parts, too little coin, too little space to work in, too little time left to make it all happen!
Update: down to one ride, still too many parts, a little more jingle in the pocket, gaining space, and it's going to happen this year!
|
|
|
Re: 5.9 Magnum rod bearing question?
[Re: racealittle]
#180611
01/01/09 06:00 PM
01/01/09 06:00 PM
|
Joined: Jan 2003
Posts: 1,263 Southwestern Ontario Canada
racealittle
OP
pro stock
|
OP
pro stock
Joined: Jan 2003
Posts: 1,263
Southwestern Ontario Canada
|
The lower portion of the shell is marked "12 98 C" No other markings. I don't have a mic large enough to measure the journal. I have never seen a bearing without a size on it.
Too many cars, too many parts, too little coin, too little space to work in, too little time left to make it all happen!
Update: down to one ride, still too many parts, a little more jingle in the pocket, gaining space, and it's going to happen this year!
|
|
|
|
|