B body dana - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer B body dana

Print Thread

B body dana #1732399 01/17/15 09:24 PM 01/17/15 09:24 PM
Joined: Jul 2008 Posts: 314 pa. greensburg fpmopar OP enthusiast
fpmopar OP enthusiast Joined: Jul 2008 Posts: 314 pa. greensburg	Can any one help me on this, bought a dana rear thought it was for a b body. Spring perches were too far apart to set on springs putting it in a 68 roadrunner. The measurement drum to drum is correct for 68 b body 60 inches. Would anyone know what its out of? It should work for 68 b body can I just move the spring perches in?????????????????

Re: B body dana [Re: fpmopar] #1732400 01/17/15 09:50 PM 01/17/15 09:50 PM
Joined: Jan 2003 Posts: 25,823 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,823 Rio Linda, CA	Does it have pads for the pinion snubber? If so, somebody already moved the perches (they should be 44" center-to-center). Look for the BOM number stamped in the right axle tube to see its original application. The INTERNET, the MISinformation superhighway

Re: B body dana [Re: fpmopar] #1732401 01/18/15 03:19 PM 01/18/15 03:19 PM
Joined: Feb 2003 Posts: 18,582 Rust Belt, SW PA Silver70 I Live Here
Silver70 I Live Here Joined: Feb 2003 Posts: 18,582 Rust Belt, SW PA	Whats the distance between the perches measured center to center? 68 Road Runner, 69 Belvedere, 71 Challenger Vert 340 barracuda, 01 Ram CTD, 95 Ram, 04 Ram, 85 Daytona turbo Z 66 GTO, 06 Magnum RT AWD. 07 Ram CTD, 07 Ram

Re: B body dana [Re: fpmopar] #1732402 01/19/15 12:51 AM 01/19/15 12:51 AM
Joined: Jul 2005 Posts: 70 Lebanon, OH Brad4406 member
Brad4406 member Joined: Jul 2005 Posts: 70 Lebanon, OH	If it is the correct width from drum to drum, cut the perches off and move them in. Be sure to set the pinion angle before welding the perches to the housing. Last edited by Brad4406; 01/19/15 12:53 AM.

Re: B body dana [Re: fpmopar] #1732403 01/19/15 09:30 AM 01/19/15 09:30 AM
Joined: Jan 2003 Posts: 8,670 Buford, GA I_bleed_MOPAR master
I_bleed_MOPAR master Joined: Jan 2003 Posts: 8,670 Buford, GA	Try here (it will show where to find the BOM and has a decoder)- http://www.differentials.com/technical-help/differential-identification Tim '71 Charger 383/727 '17 Challenger SXT (Wifeys car )

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1