Small Block Stroker Question - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Small Block Stroker Question

Print Thread

Page 1 of 2

1

2

Small Block Stroker Question #1711624 12/16/14 09:20 PM 12/16/14 09:20 PM
Joined: Jul 2003 Posts: 523 MN D dustyswinger OP mopar
dustyswinger OP mopar D Joined: Jul 2003 Posts: 523 MN	I don't know if this has been beat to death but I'm putting together another stroker with some parts I have. It will be 550-600 HP. My other stroker had 500 HP and a cast crank and scat H beam rods. My question is what is the best crank and rods to use? It will be a 4 in with a 6.123 rod with .984 pin or at least what I'm planning on. The pistons are flat tops with I think 1.46 compression height, they are weisco forged pistons. I am thinking either Molnar, Bpe or K1. Rods I have looked at are scat, K1 or molnar. I guess I am looking for input on what you guys like or dislike and have used or want to use. Thanks Craig

Re: Small Block Stroker Question [Re: dustyswinger] #1711625 12/16/14 09:59 PM 12/16/14 09:59 PM
Joined: Oct 2005 Posts: 1,927 Seaford, Va Kindafast top fuel
Kindafast top fuel Joined: Oct 2005 Posts: 1,927 Seaford, Va	I have heard so many people beat Eagle parts to death I am a little scared to post my combo. I have a Eagle forged crank and Eagle H beam rods in my 422. I love them. Just took it apart and it had wear but not hurt or beat up. A quick stock rebuild and a little cleaning and it will be good as new. I bet I have 350 or better passes on the engine and a lot of street miles. 6.50 @105.26

Re: Small Block Stroker Question [Re: dustyswinger] #1711626 12/16/14 10:02 PM 12/16/14 10:02 PM
Joined: Jan 2003 Posts: 11,711 Portage,michigan B B3422W5 I Live Here
B3422W5 I Live Here B Joined: Jan 2003 Posts: 11,711 Portage,michigan	We're it me I would contact Rod Bloomer(BPE) and have him fix you up. You will get a quality assembly and his knowledge. Have never heard anything negative about his parts or services. 69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight 418 BPE factory replacement headed stroker, 565 lift solid cam Best so far, 10.40 @127 1/4 1.41 best 60 foot 6.60 at 103.90 1/8

Re: Small Block Stroker Question [Re: B3422W5] #1711627 12/16/14 10:09 PM 12/16/14 10:09 PM
Joined: Mar 2007 Posts: 3,300 Northern Indiana Dunnuck Racing master
Dunnuck Racing master Joined: Mar 2007 Posts: 3,300 Northern Indiana	BPE is the best to deal with and positively the best value per dollars spent. Keith www.dunnuckracing.com

Re: Small Block Stroker Question [Re: Dunnuck Racing] #1711628 12/16/14 10:17 PM 12/16/14 10:17 PM
Joined: Oct 2007 Posts: 3,978 Hilltown Pa 1967dartgt master
1967dartgt master Joined: Oct 2007 Posts: 3,978 Hilltown Pa	I would call Rod BPE also. He will get you what you need and give you a smoking deal. Brett Miller W9 cnc'd heads STR Chassis fabraction

Re: Small Block Stroker Question [Re: dustyswinger] #1711629 12/16/14 10:46 PM 12/16/14 10:46 PM
Joined: Jun 2010 Posts: 3,112 LONG ISLAND fishy340 master
fishy340 master Joined: Jun 2010 Posts: 3,112 LONG ISLAND	Why not eagle ? Alot of my friends use em and to honest you'd be amazed how much powa they throw at it.

Re: Small Block Stroker Question [Re: fishy340] #1711630 12/16/14 11:14 PM 12/16/14 11:14 PM
Joined: Oct 2004 Posts: 3,354 ohio H HEMIDARTS master
HEMIDARTS master H Joined: Oct 2004 Posts: 3,354 ohio	I have shopped around a bunch, and Rod at BPE has the best deal, and the best service. He is a stand up guy, and his parts are very good quality also. At the very least you owe it to yourself to atleast talk with Rod.

Re: Small Block Stroker Question [Re: fishy340] #1711631 12/17/14 12:09 AM 12/17/14 12:09 AM
Joined: Oct 2007 Posts: 3,978 Hilltown Pa 1967dartgt master
1967dartgt master Joined: Oct 2007 Posts: 3,978 Hilltown Pa	Quote: Why not eagle ? Alot of my friends use em and to honest you'd be amazed how much powa they throw at it. Because he doesn't want sleeves in his block like mine! BOOM! Brett Miller W9 cnc'd heads STR Chassis fabraction

Re: Small Block Stroker Question [Re: 1967dartgt] #1711632 12/17/14 04:32 AM 12/17/14 04:32 AM
Joined: May 2004 Posts: 2,864 IN Irun5snd8th master
Irun5snd8th master Joined: May 2004 Posts: 2,864 IN	I currently have a BPE crank, Eagle rods, and Wiseco pistons in mine. You will be hard pressed to find anyone on here that puts more passes on their cars a year than me at my power level. They are out there but point being that the stuff lives. AFCO, Rons Fuel Injection sponsored Dodge Challenger Mention Street Lethal Motorsports

Re: Small Block Stroker Question [Re: Irun5snd8th] #1711633 12/17/14 06:26 AM 12/17/14 06:26 AM
Joined: Mar 2005 Posts: 792 Earth R Rob C super stock
Rob C super stock R Joined: Mar 2005 Posts: 792 Earth	How to contact Rod/BPE?

Re: Small Block Stroker Question [Re: 1967dartgt] #1711634 12/17/14 08:56 AM 12/17/14 08:56 AM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Quote: I would call Rod BPE also. He will get you what you need and give you a smoking deal. : Last edited by MattW; 12/17/14 08:58 AM.

Re: Small Block Stroker Question [Re: MattW] #1711635 12/17/14 08:57 AM 12/17/14 08:57 AM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Just need to get him into the G3 stuff also

Re: Small Block Stroker Question DELETED [Re: 1967dartgt] #1711636 12/17/14 08:58 AM 12/17/14 08:58 AM
Joined: Jun 2005 Posts: 2,776 Ontario Canada M MattW master
MattW master M Joined: Jun 2005 Posts: 2,776 Ontario Canada	Post deleted by MattW

Re: Small Block Stroker Question [Re: MattW] #1711637 12/17/14 12:44 PM 12/17/14 12:44 PM
Joined: Jan 2003 Posts: 9,872 Weddington, N.C. Streetwize master
Streetwize master Joined: Jan 2003 Posts: 9,872 Weddington, N.C.	Got one of Rod's cranks in my 440" stroker, (see attached) makes awesome power rods and mains all blueprinted within spec OOTB and the build was a breeze. http://youtu.be/JMxHajD_ztw 8365193-IMG_8081.jpeg (162 downloads) Last edited by Streetwize; 12/17/14 12:45 PM. WIZE World's Quickest Diahatsu Rocky (??) 414" Stroker Small block Mopar Powered. 10.84 @ 123...and gettin' quicker! https://www.youtube.com/watch?v=-mWzLma3YGI In Car: https://www.youtube.com/watch?v=PjXcf95e6v0

Re: Small Block Stroker Question [Re: Streetwize] #1711638 12/17/14 12:57 PM 12/17/14 12:57 PM
Joined: Sep 2007 Posts: 67 Walhalla, SC BlueDart member
BlueDart member Joined: Sep 2007 Posts: 67 Walhalla, SC	Just last week got complete kit from Rod you can't go wrong dealing with him gonna replace my 3.600 crank that I have ran the past 11 years with a 4.125 kit and see if it picks my Daytona up a little

Re: Small Block Stroker Question [Re: BlueDart] #1711639 12/17/14 01:37 PM 12/17/14 01:37 PM
Joined: Nov 2004 Posts: 354 K kielbasa enthusiast
kielbasa enthusiast K Joined: Nov 2004 Posts: 354	i went thru this a while back also....for the parts you're getting, i don't think you can beat a deal from BPE.....

Re: Small Block Stroker Question [Re: Rob C] #1711640 12/17/14 02:06 PM 12/17/14 02:06 PM
Joined: Mar 2007 Posts: 3,300 Northern Indiana Dunnuck Racing master
Dunnuck Racing master Joined: Mar 2007 Posts: 3,300 Northern Indiana	Quote: How to contact Rod/BPE? Easiest way is email ROD@BLOOMERPERFORMANCE.COM Keith Last edited by Dunnuck Racing; 12/17/14 02:53 PM. www.dunnuckracing.com

Re: Small Block Stroker Question [Re: Dunnuck Racing] #1711641 12/17/14 03:04 PM 12/17/14 03:04 PM
Joined: Mar 2005 Posts: 792 Earth R Rob C super stock
Rob C super stock R Joined: Mar 2005 Posts: 792 Earth	Thank you thank you!

Re: Small Block Stroker Question [Re: dustyswinger] #1711642 12/17/14 07:59 PM 12/17/14 07:59 PM
Joined: Jan 2003 Posts: 5,484 SoCal Brian Hafliger master
Brian Hafliger master Joined: Jan 2003 Posts: 5,484 SoCal	Quote: I don't know if this has been beat to death but I'm putting together another stroker with some parts I have. It will be 550-600 HP. My other stroker had 500 HP and a cast crank and scat H beam rods. My question is what is the best crank and rods to use? It will be a 4 in with a 6.123 rod with .984 pin or at least what I'm planning on. The pistons are flat tops with I think 1.46 compression height, they are weisco forged pistons. I am thinking either Molnar, Bpe or K1. Rods I have looked at are scat, K1 or molnar. I guess I am looking for input on what you guys like or dislike and have used or want to use. Thanks Craig Nothing but great things from both Scat and Molnar!! Brian Hafliger

Re: Small Block Stroker Question [Re: Brian Hafliger] #1711643 12/27/14 10:07 PM 12/27/14 10:07 PM
Joined: Oct 2008 Posts: 458 Michigan BPE mopar
BPE mopar Joined: Oct 2008 Posts: 458 Michigan	Just wanted to thank Craig (dustyswinger) for the crank order.I also wanted to thank all of the members that recommended me and my crankshafts. It means a lot that you guys have my back. Rod

Page 1 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1