Previous Thread
Next Thread
Print Thread
Page 2 of 3 1 2 3
Re: Roxboro NC street outlaws [Re: Leon441] #1664138
08/28/14 12:00 AM
08/28/14 12:00 AM
Joined: Nov 2009
Posts: 3,082
St. Paul , Mn.
tubtar Offline
master
tubtar  Offline
master

Joined: Nov 2009
Posts: 3,082
St. Paul , Mn.
Good luck.

Re: Roxboro NC street outlaws [Re: Leon441] #1664139
08/28/14 01:52 AM
08/28/14 01:52 AM
Joined: Oct 2007
Posts: 3,978
Hilltown Pa
1967dartgt Offline
master
1967dartgt  Offline
master

Joined: Oct 2007
Posts: 3,978
Hilltown Pa
Quote:

Quote:

So you are spraying two 36s and about 125-150hp on the plate. With another 150hp in fogger.




I would love to know who considers a .020 pill in a fogger to be 150hp.

150hp on the plate is a lot larger jet than .036. You should know you posted the question on the bullet. Steve gave you a link for his tuneup. Nice try Brad.

Everyone knows a .073-.082 is 150 on a single jet. Two holes half that size together are not going to flow the same. Pie R squared. Just for those following this.




Two 45 are 175 and two 54 are 200. That's a 9 spread and your 9 less with 2 36 jets. That's straight from Steve Johnson's jet chart that I got the link too. Nos jet charts call 20's 150. So tell me Leon what do you think your spraying? How many pph?


Brett Miller W9 cnc'd heads
STR Chassis fabraction
Re: Roxboro NC street outlaws [Re: Leon441] #1664140
08/28/14 08:50 AM
08/28/14 08:50 AM
Joined: Aug 2003
Posts: 8,779
Mt.Gilead, Ohio
OhioMopar Offline
master
OhioMopar  Offline
master

Joined: Aug 2003
Posts: 8,779
Mt.Gilead, Ohio
Good luck. Make Moparts proud!


1969 Dart GTS 340
1969 Super Bee X9 N-96
1969 Coronet R/T X9 N-96
2015 Dodge Dart GT
2019 Ram 2500 Big Horn.
Looking for the original block for my Bee. The last 4 are 7449
Re: Roxboro NC street outlaws [Re: OhioMopar] #1664141
08/28/14 08:59 AM
08/28/14 08:59 AM
Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
Leon441 Offline OP
master
Leon441  Offline OP
master

Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
The results are not linear when talking about the diameter in a hole. Steve's site showed two charts. One for trashcan solenoid and one for a standard R. This is with his plate.


The proper way to calculate is with your bottle on scales and is rated in lbs per hour.

Power is made with fuel not nitrous. I do not care to share my tune ups with you.


Career best 8.02 @ 169 at 3050# and 10" tires small block power.
Re: Roxboro NC street outlaws [Re: Leon441] #1664142
08/28/14 10:16 AM
08/28/14 10:16 AM
Joined: Jan 2003
Posts: 2,813
Blue Ridge, VA
Plumb Wired Offline
master
Plumb Wired  Offline
master

Joined: Jan 2003
Posts: 2,813
Blue Ridge, VA
Good luck this weekend Leon. If I can get away Sat. I will be glad to help if you need anything.


RIP Monte Smith

aka: OutlawFish
'98 Bickel Dodge Dakota PST
Re: Roxboro NC street outlaws [Re: Plumb Wired] #1664143
08/28/14 11:01 AM
08/28/14 11:01 AM
Joined: Jan 2003
Posts: 806
Kentuckian
S
sixpakx Offline
super stock
sixpakx  Offline
super stock
S

Joined: Jan 2003
Posts: 806
Kentuckian
good luck, glad to see you got the bottle back

Re: Roxboro NC street outlaws [Re: sixpakx] #1664144
08/28/14 11:08 AM
08/28/14 11:08 AM
Joined: Apr 2010
Posts: 1,049
ohio
A
all spooled up Offline
super stock
all spooled up  Offline
super stock
A

Joined: Apr 2010
Posts: 1,049
ohio
yes good luck leon is the track 1/8

Re: Roxboro NC street outlaws [Re: sixpakx] #1664145
08/28/14 11:34 AM
08/28/14 11:34 AM
Joined: Jan 2003
Posts: 13,365
Marion, South Carolina [><]
an8sec70cuda Offline
I Live Here
an8sec70cuda  Offline
I Live Here

Joined: Jan 2003
Posts: 13,365
Marion, South Carolina [><]
Quote:

good luck, glad to see you got the bottle back





CHIP
'70 hemicuda, 575" Hemi, 727, Dana 60
'69 road runner, 440-6, 18 spline 4 speed, Dana 60
'71 Demon, 340, low gear 904, 8.75
'73 Chrysler New Yorker, 440, 727, 8.75
'90 Chevy 454SS Silverado, 476" BBC, TH400, 14 bolt
'06 GMC 2500HD LBZ Duramax
Re: Roxboro NC street outlaws [Re: an8sec70cuda] #1664146
08/28/14 12:07 PM
08/28/14 12:07 PM
Joined: Jan 2008
Posts: 411
Big Island ,VA
J
JC Childress Offline
mopar
JC Childress  Offline
mopar
J

Joined: Jan 2008
Posts: 411
Big Island ,VA
Yes, its 1/8 mile. Should be neat. Good luck Leon. I know you have some good gas .....lol

Last edited by JC Childress; 08/28/14 12:08 PM.

J.C. Childress (434) 665-9541
Re: Roxboro NC street outlaws [Re: JC Childress] #1664147
08/28/14 03:28 PM
08/28/14 03:28 PM
Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
Leon441 Offline OP
master
Leon441  Offline OP
master

Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
Thanks for having it.


Career best 8.02 @ 169 at 3050# and 10" tires small block power.
Re: Roxboro NC street outlaws [Re: Leon441] #1664148
08/31/14 10:35 AM
08/31/14 10:35 AM
Joined: Jan 2007
Posts: 526
NC
B
barracuda man Offline
mopar
barracuda man  Offline
mopar
B

Joined: Jan 2007
Posts: 526
NC
How did you do leon? I wanted to go but to busy working on motor.

Last edited by barracuda man; 08/31/14 10:36 AM.
Re: Roxboro NC street outlaws [Re: barracuda man] #1664149
08/31/14 10:40 PM
08/31/14 10:40 PM
Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
Leon441 Offline OP
master
Leon441  Offline OP
master

Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
It was a no time displayed race. I really liked how the time slips showed only the reaction time.

News is we ran well. Car had too much bite. Kept wandering left in the long wheelstands. Then was difficult to drive on top. Went up on tire pressure sat morning which added to the wheel stands. Kept sneaking up on the preload. Went up another quarter lb. for first round after almost loosing the car. Car went left attempted to pedal and car bounced bad deploying the chute. Had the car to beat and double 0'ed the tree.

Changed 4-link today. Will run a lot more pressure now that we have a better idea with the tires. Mid teens in 60ft should be very easy.

Last edited by Leon441; 08/31/14 10:42 PM.

Career best 8.02 @ 169 at 3050# and 10" tires small block power.
Re: Roxboro NC street outlaws [Re: Leon441] #1664150
08/31/14 11:30 PM
08/31/14 11:30 PM
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY Offline
Master
MR_P_BODY  Offline
Master

Joined: Jun 2003
Posts: 52,972
Romeo MI
Sounds like you had a pretty hard day at the office Leon
better luck tomorrow

Re: Roxboro NC street outlaws [Re: MR_P_BODY] #1664151
10/10/14 01:18 PM
10/10/14 01:18 PM
Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
Leon441 Offline OP
master
Leon441  Offline OP
master

Joined: Nov 2004
Posts: 4,330
Lynchburg, VA
Well this is Round two for me.
Farmington,NC Oct. 10&11.

Car should be a lot more manageable. Or at least it has been. We tried my ole PTC converter that posted my best passes in '05 but it is very tight and very hard to stage with this combo. Worked on the carb but had to run ignition timing higher. Called Kenny at PTC and he said he had something better.Don't know yet but it is much easier to stage and he says it will be just as tight in high gear.

Wish me luck

Leon


Career best 8.02 @ 169 at 3050# and 10" tires small block power.
Re: Roxboro NC street outlaws [Re: Leon441] #1664152
10/10/14 03:42 PM
10/10/14 03:42 PM
Joined: Oct 2008
Posts: 458
Michigan
BPE Offline
mopar
BPE  Offline
mopar

Joined: Oct 2008
Posts: 458
Michigan
Good Luck Leon.

Rod

Re: Roxboro NC street outlaws [Re: Leon441] #1664153
10/10/14 03:47 PM
10/10/14 03:47 PM
Joined: Oct 2006
Posts: 596
Mass.
8
80fbody Offline
mopar
80fbody  Offline
mopar
8

Joined: Oct 2006
Posts: 596
Mass.
Go get 'em!!

Re: Roxboro NC street outlaws [Re: 80fbody] #1664154
10/10/14 04:17 PM
10/10/14 04:17 PM
Joined: Apr 2010
Posts: 1,049
ohio
A
all spooled up Offline
super stock
all spooled up  Offline
super stock
A

Joined: Apr 2010
Posts: 1,049
ohio
getrdone leon have fun

Re: Roxboro NC street outlaws [Re: an8sec70cuda] #1664155
10/10/14 07:37 PM
10/10/14 07:37 PM
Joined: Feb 2005
Posts: 5,207
Menomonee Falls
DemonDust Offline
master
DemonDust  Offline
master

Joined: Feb 2005
Posts: 5,207
Menomonee Falls
Quote:

Hope it goes better than the race they attempted to do at Darlington back in May...they had about 3 cars show up.
No one around here wants to run on an unprepped surface...including me. Hardly a test of who has the baddest "street car".

Any of the cars around this area that are set up to run on an unprepped surface will not go to the track, let alone run eliminations. They are grudge cars.

I get what they are doing...playing off the TV show and all. That's cool and I hope it does well.




We have KOTS up here, one show in the spring and one in the fall. They have a great turn out, extremely fast cars, and 15k payout to win.

They had to limit the gangster class to 1/8 mile since the cars were seeing the walls, very intense to watch.

Good luck Leon!!

Last edited by R5P7Duster; 10/10/14 07:37 PM.

SDG Motorsports
Hellcat Demon and Redeye Supercharger CNC Porting
https://www.sdgmotorsports.com/
Re: Roxboro NC street outlaws [Re: DemonDust] #1664156
10/10/14 08:47 PM
10/10/14 08:47 PM
Joined: Sep 2012
Posts: 1,563
Janesville, WI
SpareParts Offline
pro stock
SpareParts  Offline
pro stock

Joined: Sep 2012
Posts: 1,563
Janesville, WI
Quote:

Quote:

Hope it goes better than the race they attempted to do at Darlington back in May...they had about 3 cars show up.
No one around here wants to run on an unprepped surface...including me. Hardly a test of who has the baddest "street car".

Any of the cars around this area that are set up to run on an unprepped surface will not go to the track, let alone run eliminations. They are grudge cars.

I get what they are doing...playing off the TV show and all. That's cool and I hope it does well.




We have KOTS up here, one show in the spring and one in the fall. They have a great turn out, extremely fast cars, and 15k payout to win.

They had to limit the gangster class to 1/8 mile since the cars were seeing the walls, very intense to watch.

Good luck Leon!!



No. Only Seniors is 1/8 mile. Jr and gangster still 1/4. A few of my friends have raced it and won it, look for a Duster in next years event, which will only be one weekend.
It's a different scene no doubt but very fun and VERY REAL! Good luck Leon

Re: Roxboro NC street outlaws [Re: SpareParts] #1664157
10/10/14 10:03 PM
10/10/14 10:03 PM
Joined: Feb 2005
Posts: 5,207
Menomonee Falls
DemonDust Offline
master
DemonDust  Offline
master

Joined: Feb 2005
Posts: 5,207
Menomonee Falls
Yeah, your right my bad. It is the senior class.

Will the duster be at spring or fall?

There was a flat black murdered out road runner there this year at the fall KOTS.


SDG Motorsports
Hellcat Demon and Redeye Supercharger CNC Porting
https://www.sdgmotorsports.com/
Page 2 of 3 1 2 3






Powered by UBB.threads™ PHP Forum Software 7.7.1