Re: 1966 coronet to 70 dodge charger suspension swap???
[Re: Kern Dog]
#1602312
04/03/14 09:06 PM
04/03/14 09:06 PM
|
Joined: Feb 2003
Posts: 3,691 MO
cdp
OP
master
|
OP
master
Joined: Feb 2003
Posts: 3,691
MO
|
thanks.
Yes, I have the whole K member assembly, sway bar, and upper, lower A-arms, spindles, disc brakes, etc.
Same with the rear. springs and rear, drum to drum.
|
|
|
Re: 1966 coronet to 70 dodge charger suspension swap???
[Re: cdp]
#1602315
04/07/14 06:58 PM
04/07/14 06:58 PM
|
Joined: Jan 2003
Posts: 24,562 Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
are the rear springs usable also?
8 3/4 has the hemi springs on it. I was thinking they will work and the same as we put on my dads old hemi gtx.
measure them. Or you could go online to Mancini and see if the part numbers are the same. I'd guess they are the same, but I could be wrong.
|
|
|
Re: 1966 coronet to 70 dodge charger suspension swap???
[Re: Mr.Yuck]
#1602316
04/08/14 11:32 AM
04/08/14 11:32 AM
|
Joined: Jan 2004
Posts: 8,307 fredericksburg,va
cudaman1969
master
|
master
Joined: Jan 2004
Posts: 8,307
fredericksburg,va
|
Does the 66 already have the 8 3/4 rear? If so just change springs and center section, nothing special about the Hemi or 440 rear.
Last edited by cudaman1969; 04/08/14 11:35 AM.
|
|
|
Re: 1966 coronet to 70 dodge charger suspension swap???
[Re: cudaman1969]
#1602317
04/08/14 03:34 PM
04/08/14 03:34 PM
|
Joined: Feb 2010
Posts: 18,493 Granite Bay CA
Kern Dog
Striving for excellence
|
Striving for excellence
Joined: Feb 2010
Posts: 18,493
Granite Bay CA
|
Quote:
Does the 66 already have the 8 3/4 rear? If so just change springs and center section, nothing special about the Hemi or 440 rear.
Good point. The 66 models still used the 8 3/4" axle, just the weaker 741 chunk. The housing and axle shafts are the same as they used for the higher HP cars.
|
|
|
|
|