hILBORN FUEL INJECTION - What does it fit ? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer hILBORN FUEL INJECTION - What does it fit ?

Print Thread

hILBORN FUEL INJECTION - What does it fit ? #1582740 02/23/14 03:27 AM 02/23/14 03:27 AM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	I bought this HILBORN FUEL INJECTION unit at an auction today and cannot find a lot of info. on what it might fit. It is 2 separate manifolds that look like a BB Chrysler and the only numbers on the manifolds are 331-C-8. Any help would be great. JW 8049919-FUELINJECTION004.jpg (428 downloads)

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: jwmotors] #1582741 02/23/14 03:43 AM 02/23/14 03:43 AM
Joined: Aug 2003 Posts: 12,291 Kent, Wa 340SHORTY Truck Nut
340SHORTY Truck Nut Joined: Aug 2003 Posts: 12,291 Kent, Wa	how about some side shots of the ports. I am truckless..

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: jwmotors] #1582742 02/23/14 03:57 AM 02/23/14 03:57 AM
Joined: May 2003 Posts: 1,751 Graham, WA P Polarapete top fuel
Polarapete top fuel P Joined: May 2003 Posts: 1,751 Graham, WA	If I was to guess, I would say that would fit the first 331 CID Hemis for the 1951 models Hope you did not pay to much...I have seen auction fever and it can be scary 1986 Dodge Ramcharger 440 2wd, Bracket Racer Under Construction 1998 Ram 2500 QuadCab, new daily driver. 2008 Honda Element 2014 Carry-On 7x14 Cargo Trailer

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: Polarapete] #1582743 02/23/14 05:04 AM 02/23/14 05:04 AM
Joined: Mar 2003 Posts: 18,678 Fresno, CA Jim_Lusk I Live Here
Jim_Lusk I Live Here Joined: Mar 2003 Posts: 18,678 Fresno, CA	Quote: If I was to guess, I would say that would fit the first 331 CID Hemis for the 1951 models Hope you did not pay to much...I have seen auction fever and it can be scary It's not for a hemi of any kind...

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: Jim_Lusk] #1582744 02/23/14 09:31 AM 02/23/14 09:31 AM
Joined: Jan 2003 Posts: 17,516 Las Vegas, NV 6bblgt I Live Here
6bblgt I Live Here Joined: Jan 2003 Posts: 17,516 Las Vegas, NV	331 Cadillac (& 365/390) 8049977-Hilborn.jpg (803 downloads)

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: 6bblgt] #1582745 02/23/14 09:32 AM 02/23/14 09:32 AM
Joined: Jan 2003 Posts: 17,516 Las Vegas, NV 6bblgt I Live Here
6bblgt I Live Here Joined: Jan 2003 Posts: 17,516 Las Vegas, NV	8049979-Hilborn2.jpg (152 downloads)

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: 6bblgt] #1582746 02/23/14 09:48 AM 02/23/14 09:48 AM
Joined: Jan 2003 Posts: 926 MICHIGAN B BB65Barracuda super stock
BB65Barracuda super stock B Joined: Jan 2003 Posts: 926 MICHIGAN	sure would like to put a hilborn set up on my Hemi car! 1957 Power wagon wm300 original 10.000 mile truck, 1964 dodge Polara Convertible numbers matching

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: BB65Barracuda] #1582747 02/23/14 10:04 AM 02/23/14 10:04 AM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	Here is a bottom view 8049986-FUELINJECTION005.jpg (361 downloads)

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: jwmotors] #1582748 02/23/14 10:22 AM 02/23/14 10:22 AM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	Looking at the pictures I have found I do not think it is a Hemi, the Hemis tubes are spaced evenly apart. The BB units are grouped together. The ports are not MAX WEDGE size. As for price I go to at least one auction a week, there are a lot here in NC. Sometimes you pay to much sometimes you get a steal. In my experience I have been able to buy a lot of hard to find items ( auto parts is mostly what I look for )and tools that you would never be able to buy if the owner was still alive. The junkier the sale generally the better. They had the fuel injection unit paired up with a factory GM intake for a 62 fuel injected Vette What are the odds of finding that under some guys tool bench ?

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: jwmotors] #1582749 02/23/14 11:29 AM 02/23/14 11:29 AM
Joined: Jan 2003 Posts: 2,361 PA 7 70HemiGTX top fuel
70HemiGTX top fuel 7 Joined: Jan 2003 Posts: 2,361 PA	Just found this on the bag.....Hilborn 331-CH-80 440 Chrysler. Being it is basically the same # minus the H and 0, could it be a predecessor? Possibly.

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: jwmotors] #1582750 02/23/14 11:29 AM 02/23/14 11:29 AM
Joined: Jan 2003 Posts: 17,516 Las Vegas, NV 6bblgt I Live Here
6bblgt I Live Here Joined: Jan 2003 Posts: 17,516 Las Vegas, NV	It's CADILLAC - here's a 4-71 intake I used to own & block/head surface position. 8050034-cragar331Cadillac4-71blowerintake.jpg (264 downloads)

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: 70HemiGTX] #1582751 02/23/14 11:47 AM 02/23/14 11:47 AM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	Quote: Just found this on the bag.....Hilborn 331-CH-80 440 Chrysler. Being it is basically the same # minus the H and 0, could it be a predecessor? Possibly. I saw that on E bay Looks pretty similar , number is close. Mine the mounting flanges are not cut like BB intakes. Like you said though it could be a early version. A Caddy is possible,

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: 6bblgt] #1582752 02/23/14 02:45 PM 02/23/14 02:45 PM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	Quote: It's CADILLAC - here's a 4-71 intake I used to own & block/head surface position. [/quote 6bblgt your right looks like it is a Caddy. Pulled up a picture of a 1953 331 intake gasket and it had the holes for I assume is a locating dowel ? Thanks for your input. I guess the C means Caddy and the CH means Chrysler.

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: jwmotors] #1582753 02/23/14 04:12 PM 02/23/14 04:12 PM
A Anonymous Unregistered
Anonymous Unregistered A	Call Mike Chilando at Alkydiggers in Nashville--he will make you an offer on the spot--it is not worth as much as you think but still way cool and rare so...Mike is straight up guy I bought the one pictured complete with pump for $600 at a big well attended show--it takes about $1000 more to get a good pump, plumbing, nozzles etc so it is a Long way from running again--hose sets are over $150 FWIW

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: jwmotors] #1582754 02/23/14 10:02 PM 02/23/14 10:02 PM
Joined: Aug 2003 Posts: 43,200 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,200 Bend,OR USA	Quote: Here is a bottom view I would measure the port width and height to see if it is a 440, M.W.or B1 port size Looking at the first picture it looks like this unit is a cast magneiseum (SP?) unit, not aluminum Call them and ask the source, there really good folks to deal with Those early tubelar mechanical F.I. unit converted to EFI works great at the track and on the street Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: Cab_Burge] #1582755 02/23/14 10:45 PM 02/23/14 10:45 PM
Joined: Aug 2003 Posts: 12,291 Kent, Wa 340SHORTY Truck Nut
340SHORTY Truck Nut Joined: Aug 2003 Posts: 12,291 Kent, Wa	I have a nice Enderle setup for a 289/302 Ford.. I am truckless..

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: 340SHORTY] #1582756 02/24/14 12:04 AM 02/24/14 12:04 AM
Joined: Jan 2005 Posts: 1,606 Pgh, PA B Bull1tt top fuel
Bull1tt top fuel B Joined: Jan 2005 Posts: 1,606 Pgh, PA	Looks like Cadillac, this is 331 Hemi Hilborn. 8050768-331hilb.jpg (216 downloads)

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: Bull1tt] #1582757 02/24/14 12:09 AM 02/24/14 12:09 AM
Joined: Jan 2005 Posts: 1,606 Pgh, PA B Bull1tt top fuel
Bull1tt top fuel B Joined: Jan 2005 Posts: 1,606 Pgh, PA	BB Mopar wedge engine Hilborn unit. 8050775-440ChryslerMaxWedge.jpg (437 downloads)

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: Bull1tt] #1582758 02/24/14 12:14 AM 02/24/14 12:14 AM
Joined: Jan 2005 Posts: 1,606 Pgh, PA B Bull1tt top fuel
Bull1tt top fuel B Joined: Jan 2005 Posts: 1,606 Pgh, PA	Compare yours to the post above 8050785-caddy.jpg (240 downloads)

Re: hILBORN FUEL INJECTION - What does it fit ? [Re: Bull1tt] #1582759 02/24/14 12:27 AM 02/24/14 12:27 AM
Joined: Dec 2006 Posts: 108 NC J jwmotors OP member
jwmotors OP member J Joined: Dec 2006 Posts: 108 NC	Thanks for the help Bull1tt, It is for a Cadilac as pointed out by you and 6bblgt . Looks like the Caddy stuff is non-existent , which from a selling the selling end is good,

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1