Small Block Stroker Carb Size - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Small Block Stroker Carb Size

Print Thread

Small Block Stroker Carb Size #1362192 12/31/12 12:08 PM 12/31/12 12:08 PM
Joined: May 2006 Posts: 121 Michigan D dusterjp OP member
dusterjp OP member D Joined: May 2006 Posts: 121 Michigan	What size carb are you guys running on your small block strokers. This car is 99.9% street driven with a trip to the track every 2 to 3 years. Here is my combo. Thanks in advance for all advice. 418 CI 10.9 to 1 Comp. Ported Edelbrock Heads Solid Flat Tappet (Dur. 254 Int. 262 Ex.@.050 Lift 540 Int. 555 Ex.) Ported Super Victor Intake TTI Step Headers 1 5/8 - 1/78 3.91 Gear 4 Spd. Wieghs 3200 lbs. Last edited by dusterjp; 12/31/12 12:10 PM.

Re: Small Block Stroker Carb Size [Re: dusterjp] #1362193 12/31/12 12:27 PM 12/31/12 12:27 PM
Joined: May 2010 Posts: 207 warren, mich. D dwayne welder enthusiast
dwayne welder enthusiast D Joined: May 2010 Posts: 207 warren, mich.	Hello, I like your combination! Should make real good torque for the steet!!! I also like your header combo, very good choice!!! I have Built very simular combo's in sb. chey's. I use a 750 holley, vacuum secondery setup. Good street drivability!!!! You will still need to do some tuningwith,accelerator pump size, some jeting,and secondery spring tuning!!!! But al in al you should be good with that!!!! Good luck, HAPPY NEW YEAR!!!

Re: Small Block Stroker Carb Size [Re: dwayne welder] #1362194 12/31/12 01:13 PM 12/31/12 01:13 PM
Joined: Oct 2007 Posts: 3,978 Hilltown Pa 1967dartgt master
1967dartgt master Joined: Oct 2007 Posts: 3,978 Hilltown Pa	I would run a 950 on that combo. My edelbrocks loved it with a auto so with a stick I think it would even be better. Brett Miller W9 cnc'd heads STR Chassis fabraction

Re: Small Block Stroker Carb Size [Re: dusterjp] #1362195 12/31/12 01:19 PM 12/31/12 01:19 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Quote: What size carb are you guys running on your small block strokers. This car is 99.9% street driven with a trip to the track every 2 to 3 years. Here is my combo. Thanks in advance for all advice. 418 CI 10.9 to 1 Comp. Ported Edelbrock Heads Solid Flat Tappet (Dur. 254 Int. 262 [Email]Ex.@.050[/Email] Lift 540 Int. 555 Ex.) Ported Super Victor Intake TTI Step Headers 1 5/8 - 1/78 3.91 Gear 4 Spd. Wieghs 3200 lbs. I built a 418 for my Rampage and went with a 850DP and it made 550hp and 520ftlbs ... this was with W-5 heads and 1 7/8 tubes, same compression.. it would have made more power with a bigger carb but this was enough power to put me at my max ET in my car... strokers really like CFM but it comes down to how much fuel you want to throw at it on the street

Re: Small Block Stroker Carb Size [Re: MR_P_BODY] #1362196 12/31/12 05:51 PM 12/31/12 05:51 PM
Joined: Jan 2003 Posts: 1,883 Northern OH R rapom top fuel
rapom top fuel R Joined: Jan 2003 Posts: 1,883 Northern OH	I have a 800 edelbrock thunder series on my mild 406 stroker in a 68 charger, and it is a perfect match. But I had to buy the carb. tuneup kit to get it to run right.

Re: Small Block Stroker Carb Size [Re: dusterjp] #1362197 12/31/12 06:03 PM 12/31/12 06:03 PM
Joined: Oct 2003 Posts: 11,684 W. Kentucky justinp61 I Live Here
justinp61 I Live Here Joined: Oct 2003 Posts: 11,684 W. Kentucky	My 408 is very close to yours, same compression and heads. I have just a little more duration and more lift with a Victor. Mine loves the Bigs 950HP on it. I'd like to try a 1000 4150 to see if it would pick up.

Re: Small Block Stroker Carb Size [Re: justinp61] #1362198 12/31/12 06:52 PM 12/31/12 06:52 PM
Joined: Jan 2003 Posts: 42,714 Spokane Washington ScottSmith_Harms Mr Wizzard
ScottSmith_Harms Mr Wizzard Joined: Jan 2003 Posts: 42,714 Spokane Washington	Another vote for the Holley 950, Great carb on a stroker SB, but as mentioned any of these big Holleys are THIRSTY! You could probably have just as much fun on the street with a substantially smaller carb (750 range) but you'd leave some HP on the table.

Re: Small Block Stroker Carb Size [Re: ScottSmith_Harms] #1362199 12/31/12 07:03 PM 12/31/12 07:03 PM
Joined: Feb 2005 Posts: 20,179 PA. pittsburghracer "Little"John
pittsburghracer "Little"John Joined: Feb 2005 Posts: 20,179 PA.	I've gone 9.98@130 mph in my 408 Duster with a 750 holly but will be trying a 850 and a 1050 dom in 2013. I'm a bracket racer and the 750 ran so consistent I didn't want to play with it but like I said its time to test. 1970 Duster Edelbrock headed 408 5.984@112.52 422 Indy headed small block 5.982@112.56 mph 9.42@138.27 Livin and lovin life one day at a time

Re: Small Block Stroker Carb Size [Re: pittsburghracer] #1362200 12/31/12 07:21 PM 12/31/12 07:21 PM
Joined: Jan 2003 Posts: 412 Hampton Va gtsdon mopar
gtsdon mopar Joined: Jan 2003 Posts: 412 Hampton Va	Has anyone tried a Pro Systems carb on their stroker? I was talking with their tech and was told their new 750- 4150 series carb could produce 18-35 more horsepower than my current 750 HP Holley. Their carbs are nice looking but I just don�t see how they are that much better than the HP Carbs.

Re: Small Block Stroker Carb Size [Re: gtsdon] #1362201 12/31/12 08:30 PM 12/31/12 08:30 PM
Joined: Dec 2007 Posts: 310 Michigan 4 412 SB Duster enthusiast
412 SB Duster enthusiast 4 Joined: Dec 2007 Posts: 310 Michigan	I've had great success with Pro Systems carbs. They built me a 780 for my 372. And when I stepped up to the 412 they built me a 950 both ran great out of the box. Al

Re: Small Block Stroker Carb Size [Re: 412 SB Duster] #1362202 12/31/12 08:46 PM 12/31/12 08:46 PM
Joined: Jan 2003 Posts: 1,365 elmira ny hp340nos pro stock
hp340nos pro stock Joined: Jan 2003 Posts: 1,365 elmira ny	i run a AED850 db pumper on my pumpgas 418 stroker.

Re: Small Block Stroker Carb Size [Re: hp340nos] #1362203 12/31/12 08:59 PM 12/31/12 08:59 PM
Joined: Jan 2003 Posts: 6,266 Renton Washington T Triple Threat master
Triple Threat master T Joined: Jan 2003 Posts: 6,266 Renton Washington	I ran a 4150 1000HP and 750HP on my last 390" small block stroker. It made ~550hp. The 1000 was maybe .05 faster than the 750, not a really big gain. -Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA

Re: Small Block Stroker Carb Size [Re: Triple Threat] #1362204 01/01/13 03:34 PM 01/01/13 03:34 PM
Joined: Feb 2009 Posts: 207 People's Republic of Mass. B Belvedere2 enthusiast
Belvedere2 enthusiast B Joined: Feb 2009 Posts: 207 People's Republic of Mass.	I'll be trying my TQ/Strip Dom combo this yr on my 380. Got to be easier on gas than my 750DP.

Re: Small Block Stroker Carb Size [Re: Belvedere2] #1362205 01/02/13 10:22 PM 01/02/13 10:22 PM
Joined: May 2006 Posts: 121 Michigan D dusterjp OP member
dusterjp OP member D Joined: May 2006 Posts: 121 Michigan	Thanks for all the advice.

Re: Small Block Stroker Carb Size [Re: justinp61] #1362206 01/02/13 11:03 PM 01/02/13 11:03 PM
Joined: Jan 2003 Posts: 5,486 SoCal Brian Hafliger master
Brian Hafliger master Joined: Jan 2003 Posts: 5,486 SoCal	Quote: My 408 is very close to yours, same compression and heads. I have just a little more duration and more lift with a Victor. Mine loves the Bigs 950HP on it. I'd like to try a 1000 4150 to see if it would pick up. On the dyno I've seen an additional 5-8 HP over the 950 but haven't tried it at the track. Brian Hafliger

Re: Small Block Stroker Carb Size [Re: Brian Hafliger] #1362207 01/02/13 11:56 PM 01/02/13 11:56 PM
Joined: Feb 2006 Posts: 501 CEDAR RAPIDS Plymouth340 mopar
Plymouth340 mopar Joined: Feb 2006 Posts: 501 CEDAR RAPIDS	i have a 398 stroker and the 1000 was a tenth quicker in the quarter then the 850 with indy intake..

Re: Small Block Stroker Carb Size [Re: 412 SB Duster] #1362208 01/03/13 12:09 AM 01/03/13 12:09 AM
Joined: Oct 2003 Posts: 7,506 Az Crizila master
Crizila master Joined: Oct 2003 Posts: 7,506 Az	Quote: I've had great success with Pro Systems carbs. They built me a 780 for my 372. And when I stepped up to the 412 they built me a 950 both ran great out of the box. Al Me too. Ran a Prosystems 950 on my 408 NA motor and I'm running the same carb modified by ProSystems om my 408 blower motor. 7530789-hoodhole.jpg (60 downloads) Fastest 300

Re: Small Block Stroker Carb Size [Re: Crizila] #1362209 01/04/13 02:24 AM 01/04/13 02:24 AM
Joined: Nov 2004 Posts: 3,517 pacific northwest S Stroker Scamp master
Stroker Scamp master S Joined: Nov 2004 Posts: 3,517 pacific northwest	Holley HP 950, gonna try a 1050 dommy next footbrake N/A SB 408 Scamp 10.10 @ 132 street/strip 73 Duster 340 street strip 12.79 @ 105

Re: Small Block Stroker Carb Size [Re: Stroker Scamp] #1362210 01/04/13 07:52 AM 01/04/13 07:52 AM
Joined: Feb 2005 Posts: 2,709 NJ central S Scamp408 master
Scamp408 master S Joined: Feb 2005 Posts: 2,709 NJ central	Race Demon 1000. I would like to try a holley 950 and a dom but wont fit under hood.

Re: Small Block Stroker Carb Size [Re: Scamp408] #1362211 01/04/13 10:01 AM 01/04/13 10:01 AM
Joined: Jan 2003 Posts: 9,875 Weddington, N.C. Streetwize master
Streetwize master Joined: Jan 2003 Posts: 9,875 Weddington, N.C.	I run the 1000HP Pro-systems on both my 414 small block and 517 Big Block and I'm very happy with them. WIZE World's Quickest Diahatsu Rocky (??) 414" Stroker Small block Mopar Powered. 10.84 @ 123...and gettin' quicker! https://www.youtube.com/watch?v=-mWzLma3YGI In Car: https://www.youtube.com/watch?v=PjXcf95e6v0

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1