Carb info - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Carb info

Print Thread

Carb info #1227669 05/05/12 06:02 PM 05/05/12 06:02 PM
Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI Sledge_57 OP master
Sledge_57 OP master Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI	My friend has a 70 Road Runner, 383, 4 speed, 4 barrel. He wants to find the proper carb for this engine and I told him I'd ask the experts. He has a build sheet (mostly legible) if needed. He's also wondering if there was some sort of spacer or a certain gasket used for the carb. He says it has some sort of metal gasket at the moment. So... anyone? Thanks... Doug 1967 "Pedal Car" 500" low deck , TF 727, 4.30 Locker Best to Date: 11.67 @ 114.9 1.64 60ft "Kids in cars cause accidents. Accidents in cars cause kids..."

Re: Carb info [Re: Sledge_57] #1227670 05/05/12 06:07 PM 05/05/12 06:07 PM
Joined: Jan 2003 Posts: 1,652 Calgary, Alberta Canada m46rat top fuel
m46rat top fuel Joined: Jan 2003 Posts: 1,652 Calgary, Alberta Canada	Holley 4367 unless it is an N95 emissions car or a fresh air equipped car. Is it either or both of those? If so, it will use a different Holley 4bbl. Is the CARB section of his broadcast sheet legible? It is located in the top third of the sheet.

Re: Carb info [Re: m46rat] #1227671 05/05/12 06:21 PM 05/05/12 06:21 PM
Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI Sledge_57 OP master
Sledge_57 OP master Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI	Quote: Holley 4367 unless it is an N95 emissions car or a fresh air equipped car. Is it either or both of those? If so, it will use a different Holley 4bbl. Is the CARB section of his broadcast sheet legible? It is located in the top third of the sheet. He says it has a Carter at the moment, so it definitely should be a Holley in 1970? What exactly do we need to look for on the broadcast sheet, I assume it's not clearly spelled out.... Doug 1967 "Pedal Car" 500" low deck , TF 727, 4.30 Locker Best to Date: 11.67 @ 114.9 1.64 60ft "Kids in cars cause accidents. Accidents in cars cause kids..."

Re: Carb info [Re: Sledge_57] #1227672 05/05/12 06:28 PM 05/05/12 06:28 PM
Joined: Jan 2003 Posts: 1,652 Calgary, Alberta Canada m46rat top fuel
m46rat top fuel Joined: Jan 2003 Posts: 1,652 Calgary, Alberta Canada	It IS clearly spelled out! Fourth line down from the top, there are two numbers listed under CARB. That would be three boxes in from the left side of the sheet. What are the two numbers?

Re: Carb info [Re: m46rat] #1227673 05/08/12 07:53 PM 05/08/12 07:53 PM
Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI Sledge_57 OP master
Sledge_57 OP master Joined: Nov 2003 Posts: 4,027 Dearborn Hts, MI	Quote: It IS clearly spelled out! Fourth line down from the top, there are two numbers listed under CARB. That would be three boxes in from the left side of the sheet. What are the two numbers? OK he finally found his sheet. The CARB code is 36. Doug 1967 "Pedal Car" 500" low deck , TF 727, 4.30 Locker Best to Date: 11.67 @ 114.9 1.64 60ft "Kids in cars cause accidents. Accidents in cars cause kids..."

Re: Carb info [Re: Sledge_57] #1227674 05/08/12 08:42 PM 05/08/12 08:42 PM
Joined: Jan 2003 Posts: 1,652 Calgary, Alberta Canada m46rat top fuel
m46rat top fuel Joined: Jan 2003 Posts: 1,652 Calgary, Alberta Canada	The carb. service number that corresponds to that is 3418 536 which is for a Holley 4367 4bbl carb. If he really wants a correct one, you will need to find out the SPD(Scheduled Production Date) of the car. It is located under Vehicle Production Number at the top of the broadcast sheet. It is the first three digits on the left. Then find a 4367 dated previous to that date. I may have one, or Scott Smith at Harms Auto may also. Let me know what the three digits are.

Re: Carb info [Re: m46rat] #1227675 05/09/12 01:32 AM 05/09/12 01:32 AM
Joined: Jan 2003 Posts: 42,714 Spokane Washington ScottSmith_Harms Mr Wizzard
ScottSmith_Harms Mr Wizzard Joined: Jan 2003 Posts: 42,714 Spokane Washington	I'm watching, post the date and I'll check

Re: Carb info [Re: ScottSmith_Harms] #1227676 05/10/12 02:39 PM 05/10/12 02:39 PM
Joined: Jan 2003 Posts: 17,518 Las Vegas, NV 6bblgt I Live Here
6bblgt I Live Here Joined: Jan 2003 Posts: 17,518 Las Vegas, NV	I have a 3039 dated (Thursday, 10/30/69) Holley 4367 that I won't be using.

Re: Carb info [Re: 6bblgt] #1227677 05/10/12 08:23 PM 05/10/12 08:23 PM
Joined: Jan 2003 Posts: 1,194 M MoreParts super stock
MoreParts super stock M Joined: Jan 2003 Posts: 1,194	Just to piggy back on this thread with a quickie of a question. I have a 70 Challenger R/T with a scheduled date of 5/15/70 and the holley carb (4368) has a date 71 days prior. Would that be considered in the realm of acceptable build dates?

Re: Carb info [Re: MoreParts] #1227678 05/10/12 08:55 PM 05/10/12 08:55 PM
Joined: Jan 2003 Posts: 75,058 U.S.S.A. JohnRR I Win
JohnRR I Win Joined: Jan 2003 Posts: 75,058 U.S.S.A.	Quote: Just to piggy back on this thread with a quickie of a question. I have a 70 Challenger R/T with a scheduled date of 5/15/70 and the holley carb (4368) has a date 71 days prior. Would that be considered in the realm of acceptable build dates? What is the assembly date on the engine ? that asked , the engine was stamped with an assembly date before being painted and the carb was installed after paint ... I ASSuME ... so it should still be AROUND the assembly , but more than likely BEFORE ... Scoot and others probably have a better idea. Oh and don't go looking to dan for a price on that carb , he's a few hundred HIGH on his pricing ...

Re: Carb info [Re: JohnRR] #1227679 05/10/12 09:07 PM 05/10/12 09:07 PM
Joined: Jan 2003 Posts: 14,471 renton, Washington ph23vo I Live Here
ph23vo I Live Here Joined: Jan 2003 Posts: 14,471 renton, Washington	Quote: Quote: Just to piggy back on this thread with a quickie of a question. I have a 70 Challenger R/T with a scheduled date of 5/15/70 and the holley carb (4368) has a date 71 days prior. Would that be considered in the realm of acceptable build dates? What is the assembly date on the engine ? that asked , the engine was stamped with an assembly date before being painted and the carb was installed after paint ... I ASSuME ... so it should still be AROUND the assembly , but more than likely BEFORE ... Scoot and others probably have a better idea. Oh and don't go looking to dan for a price on that carb , he's a few hundred HIGH on his pricing ... i already SOLD that carb anyway..so good luck.. got 250.00 for mine.. dan

Re: Carb info [Re: JohnRR] #1227680 05/10/12 10:02 PM 05/10/12 10:02 PM
Joined: Jan 2003 Posts: 1,194 M MoreParts super stock
MoreParts super stock M Joined: Jan 2003 Posts: 1,194	Quote: Quote: Just to piggy back on this thread with a quickie of a question. I have a 70 Challenger R/T with a scheduled date of 5/15/70 and the holley carb (4368) has a date 71 days prior. Would that be considered in the realm of acceptable build dates? What is the assembly date on the engine ? that asked , the engine was stamped with an assembly date before being painted and the carb was installed after paint ... I ASSuME ... so it should still be AROUND the assembly , but more than likely BEFORE ... Scoot and others probably have a better idea. Oh and don't go looking to dan for a price on that carb , he's a few hundred HIGH on his pricing ... It's been a heck of a long time since I've checked those codes. I've had the car since '91. Where would it be on a 383 car?

Re: Carb info [Re: ph23vo] #1227681 05/10/12 10:37 PM 05/10/12 10:37 PM
Joined: Aug 2004 Posts: 2,094 New Mexico J JMCFAN top fuel
JMCFAN top fuel J Joined: Aug 2004 Posts: 2,094 New Mexico	dang! you did good! 68 Charger 383/ AT Green/Green VT 70 Roadrunner 383/4sp Purple/Black VT

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1