|
Re: checkered racing back half kits ??????
[Re: dan1320]
#1225570
05/01/12 10:12 PM
05/01/12 10:12 PM
|
Joined: Dec 2009
Posts: 20,657 in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 20,657
in a cattle trailer down by th...
|
I bought the 4 link backhalf from them that's in the Scamp. No problems but I did get CM rod ends. There are things about it I'd like different like some flats on the bars but over all for the price it was a good deal.
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost conversion. 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
Re: checkered racing back half kits ??????
[Re: Bigbeep]
#1225573
05/02/12 12:39 AM
05/02/12 12:39 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
[ There are things about it I'd like different like some flats on the bars but over all for the price it was a good deal.
I have done this before. Get 4 nuts that are just a little larger than the 4 link tubes. Bore the centers out on a lathe or just drill them out big enough to slide over your tubes and have them tigged on the bars where it is easy to reach while making adjustments. Make sure to clean all the zinc/cadium plating off of the nuts before welding. Beep
For a few bucks more you can buy the tube inserts with the hex on them(all the inserts I use the LH insert has the hex and looks nicer)... also that kit shown doesnt have a back brace on the rear end (thats a MUST in my opinion) so it MIGHT require a longer set of shock mounts to clear the back brace which is no big deal but keep it in mind... other than that it looks like ALL the rest of that style back halfs... unless you go with a wish bone locator
|
|
|
Re: checkered racing back half kits ??????
[Re: Bigbeep]
#1225574
05/02/12 06:49 AM
05/02/12 06:49 AM
|
Joined: Dec 2009
Posts: 20,657 in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 20,657
in a cattle trailer down by th...
|
Quote:
[ There are things about it I'd like different like some flats on the bars but over all for the price it was a good deal.
I have done this before. Get 4 nuts that are just a little larger than the 4 link tubes. Bore the centers out on a lathe or just drill them out big enough to slide over your tubes and have them tigged on the bars where it is easy to reach while making adjustments. Make sure to clean all the zinc/cadium plating off of the nuts before welding. Beep
Good idea. Thanks.
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost conversion. 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
|
|
|