Is there a 'modern' version of the MP .528 cam?
#118646
09/10/08 01:46 PM
09/10/08 01:46 PM
|
Joined: Nov 2004
Posts: 238 St. Catharines, ON
NewMemberAgain
OP
super street
|
OP
super street
Joined: Nov 2004
Posts: 238
St. Catharines, ON
|
I am in the process of de-racing my dart sport, and wanted to change a few things around. One of them is the camshaft. I really like the spec's of this camshaft, and has been proven time and time again. I just wondered if a newer cam exists. Streetable is the key, along with the long 112 centerline makes for good idle and vacuum. Or have I just sold myself on this cam? Bryan 73' Dart Sport w/440
|
|
|
Re: Is there a 'modern' version of the MP .528 cam?
[Re: NewMemberAgain]
#118648
09/10/08 02:02 PM
09/10/08 02:02 PM
|
Joined: Feb 2004
Posts: 4,501 Gainesville,FL
goldmember
master
|
master
Joined: Feb 2004
Posts: 4,501
Gainesville,FL
|
Call Tim at Bullet racing cams he has a Purple Shaft replacement ground for a .904 lifter [Email]270@.020[/Email] [Email]243@.050[/Email] .548 lift with 1.5 rocker. I've run it in a 360 street car and really liked it. Pulls good from 2500 up and idles nice with decent vaccum. Went 11's with an 11" converter,3.91 gear 28" tire Non quench sb with factory heads in and a body. Mid 11's with a 4200 converter and 4.30 gears. Lash is .016"
Last edited by goldmember; 09/10/08 02:08 PM.
|
|
|
Re: Is there a 'modern' version of the MP .528 cam?
[Re: AndyF]
#118652
09/10/08 03:48 PM
09/10/08 03:48 PM
|
Joined: Nov 2004
Posts: 238 St. Catharines, ON
NewMemberAgain
OP
super street
|
OP
super street
Joined: Nov 2004
Posts: 238
St. Catharines, ON
|
Thanks for replying guys. I just really wanted to hear some feedback, even though I feel I am going to get it. This 'might' change things, but I forgot to give my motor combo. 440 + .55 Ross 10:1 pistons, (really about 9.75) Stock Eddy Heads (84cc) Dual Quad Eddy Intake Dual Carter 625's OLD CPPA 1 3/4 " headers - NOTE Will goto Tri Y's 2.5" Exhaust into TA/AAR mufflers w/ tips 4.56's with 28 x 11.5 MT ET Streets Over winter 3.55, or 3.91?? MSD 6AL Stock MP Distributor Car has 8 point roll bar in it now, but over the winter will cut out the door bars, and horizontal bar in the hoop, and put back the rest of the interior again. Maybe, I will start to drive it again after all the work =
|
|
|
|
|