|
Update: Would you run a hub with this damage?
#1159009
01/16/12 11:42 PM
01/16/12 11:42 PM
|
Joined: Jan 2005
Posts: 3,344
Central TX
roe
OP
master
|
OP
master
Joined: Jan 2005
Posts: 3,344
Central TX
|
Got a pair of these for a great price off of ebay. They taped the boxes together when they shipped them, and you can see where the one in the bottom box took a beating, the broken part is laying in the box as well. Anyway, its for a '71 satellite w/ 11" brakes. In the pic you can see where the damage is, and I also included a pic of the undamaged one. It looks to me to only affect where the retainer/seal would go, and looks to me like once the seal is installed that area should be sealed up. If its safe, I was thinking I could hit it with a grinder to kind of clean it up and then run it if the seal will cover that spot and still keep out dust and dirt. So the question is do you guys think that will be safe? I think it will be, but thought I would ask you guys here first. Also, if its not, is that something that I could have a machine shop repair? Maybe weld in some new metal and clean everything up? Also I havent talked back to the place I bought it from. They were very pleasant to deal with on the purchase and have great feedback so I dont think it would be a big hassle to try and have it replaced. Just didnt want to deal with it is all. If I can safely run what I have, I'd rather just do that.   
Last edited by roe; 01/17/12 11:51 PM.
1971 Plymouth Satellite
408/904 8 3/4 3.23 SG
|
|
|
Re: Would you run a hub with this damage?
[Re: roe]
#1159010
01/16/12 11:49 PM
01/16/12 11:49 PM
|
Joined: Dec 2003
Posts: 22,696
Bitopia
jcc
If you can't dazzle em with diamonds..
|
If you can't dazzle em with diamonds..
Joined: Dec 2003
Posts: 22,696
Bitopia
|
My answer would be no, unless you were stuck on the side of the road in rain in west texas on the way to your wedding to Brittney. 
Last edited by jcc; 01/16/12 11:50 PM.
Reality check, that half the population is smarter then 50% of the people and it's a constantly contested fact.
|
|
|
Re: Would you run a hub with this damage?
[Re: jcc]
#1159012
01/16/12 11:52 PM
01/16/12 11:52 PM
|
Joined: Nov 2005
Posts: 1,943
San Angelo, Texas, U.S.A.
1968RR
top fuel
|
top fuel
Joined: Nov 2005
Posts: 1,943
San Angelo, Texas, U.S.A.
|
Quote:
My answer would be no, unless you were stuck on the side of the road in rain in west texas on the way to your wedding to Brittney.
There's no such thing as rain in West Texas.
By the way, I'd try to return the damaged hubs. The seller should have packed them correctly. 
"When I'm in a slump, I comfort myself by saying if I believe in dinosaurs, then somewhere, they must be believing in me. And if they believe in me, then I can believe in me." - Mookie Wilson
|
|
|
Re: Would you run a hub with this damage?
[Re: goldmember]
#1159014
01/17/12 12:31 AM
01/17/12 12:31 AM
|
Joined: Jan 2005
Posts: 3,344
Central TX
roe
OP
master
|
OP
master
Joined: Jan 2005
Posts: 3,344
Central TX
|
Im glad I asked here first, it seems the consensus is not to risk it and go ahead and have it replaced. I just sent them a message on ebay and will call tomorrow. Hopefully they will work with as Im outside their normal return period. Before I get flamed for waiting too long, I ordered these months before I left Iraq so there was no way for me to inspect them and return it during their normal 7day return period. Hopefully they'll work with me.
1971 Plymouth Satellite
408/904 8 3/4 3.23 SG
|
|
|
Re: Would you run a hub with this damage?
[Re: mopars4ever]
#1159018
01/17/12 11:50 PM
01/17/12 11:50 PM
|
Joined: Jan 2005
Posts: 3,344
Central TX
roe
OP
master
|
OP
master
Joined: Jan 2005
Posts: 3,344
Central TX
|
Well, I talked to the owner today and he says that plain and simple, theres nothing he can do to help me out. Cant get another for exchange, which is what I asked for, he cant go after UPS because its been too long, but he offers up that I go after UPS, which I know is a dead end. I thought they would take care of it, but he (owner) was very dismissive about it, and I never took a nasty tone. So after the phonecall was over, I sent him an email basically telling him that I thought his level of customer service was lacking, that I wouldn't be purchasing from him again, and that I would let others know of my experiece and let them draw their own conlusions. Again, I want to let it be known that he does have a clearly stated 7day return policy, which I was not able to meet because of me being in Iraq, but I was hoping that he work with me. So I ended the email asking for a refund for just the one broken hub, no shipping costs. We'll see what happens. Good news is I found another seller with one in stock for $75 with free shipping. A whole lot better than the $178 or so that a parts store wants.
1971 Plymouth Satellite
408/904 8 3/4 3.23 SG
|
|
|
Re: Would you run a hub with this damage?
[Re: roe]
#1159019
01/18/12 12:00 AM
01/18/12 12:00 AM
|
Joined: Nov 2005
Posts: 1,943
San Angelo, Texas, U.S.A.
1968RR
top fuel
|
top fuel
Joined: Nov 2005
Posts: 1,943
San Angelo, Texas, U.S.A.
|
Quote:
Well, I talked to the owner today and he says that plain and simple, theres nothing he can do to help me out. Cant get another for exchange, which is what I asked for, he cant go after UPS because its been too long, but he offers up that I go after UPS, which I know is a dead end. I thought they would take care of it, but he (owner) was very dismissive about it, and I never took a nasty tone. So after the phonecall was over, I sent him an email basically telling him that I thought his level of customer service was lacking, that I wouldn't be purchasing from him again, and that I would let others know of my experiece and let them draw their own conlusions. Again, I want to let it be known that he does have a clearly stated 7day return policy, which I was not able to meet because of me being in Iraq, but I was hoping that he work with me. So I ended the email asking for a refund for just the one broken hub, no shipping costs. We'll see what happens. Good news is I found another seller with one in stock for $75 with free shipping. A whole lot better than the $178 or so that a parts store wants.
In all fairness, you are well beyond the seller's return date. However, given your circumstances I think that the cool thing to do would have been to give you an exchange. The seller obviously didn't pack the order correctly. Basically, I think that the seller is within his rights, but he's not necessarily doing the "right" thing.
"When I'm in a slump, I comfort myself by saying if I believe in dinosaurs, then somewhere, they must be believing in me. And if they believe in me, then I can believe in me." - Mookie Wilson
|
|
|
Re: Would you run a hub with this damage?
[Re: 1968RR]
#1159021
01/18/12 12:06 AM
01/18/12 12:06 AM
|
Joined: Jan 2005
Posts: 3,344
Central TX
roe
OP
master
|
OP
master
Joined: Jan 2005
Posts: 3,344
Central TX
|
Quote:
Quote:
Well, I talked to the owner today and he says that plain and simple, theres nothing he can do to help me out. Cant get another for exchange, which is what I asked for, he cant go after UPS because its been too long, but he offers up that I go after UPS, which I know is a dead end. I thought they would take care of it, but he (owner) was very dismissive about it, and I never took a nasty tone. So after the phonecall was over, I sent him an email basically telling him that I thought his level of customer service was lacking, that I wouldn't be purchasing from him again, and that I would let others know of my experiece and let them draw their own conlusions. Again, I want to let it be known that he does have a clearly stated 7day return policy, which I was not able to meet because of me being in Iraq, but I was hoping that he work with me. So I ended the email asking for a refund for just the one broken hub, no shipping costs. We'll see what happens. Good news is I found another seller with one in stock for $75 with free shipping. A whole lot better than the $178 or so that a parts store wants.
In all fairness, you are well beyond the seller's return date. However, given your circumstances I think that the cool thing to do would have been to give you an exchange. The seller obviously didn't pack the order correctly. Basically, I think that the seller is within his rights, but he's not necessarily doing the "right" thing.
Yeah, thats pretty much how I feel, which is why Im not on here trying to flame the owner. I just wanted to have this taken care of. Thats why I mention the clearly posted 7day return policy, which I couldn't meet. I just thought my reason for not meeting it was a worthy one, and even offered a copy of my orders to show that I was indeed deployed at the time. He's definately not shafting me or anything, but I think if I were in his shoes I would have "done the right thing".
1971 Plymouth Satellite
408/904 8 3/4 3.23 SG
|
|
|
Re: Would you run a hub with this damage?
[Re: NITROUSN]
#1159022
01/18/12 12:12 AM
01/18/12 12:12 AM
|
Joined: Jan 2005
Posts: 3,344
Central TX
roe
OP
master
|
OP
master
Joined: Jan 2005
Posts: 3,344
Central TX
|
I ordered them Oct 12th or so, they were probably delivered about 2 wks later, and I didnt get back stateside until about Dec 1. Then with redeployment stuff, moving my family from FL to TX, etc...inspecting parts weren't at the top of my "to do" list.
So like I say, I can understand him saying its too late and way past his known 7day policy, but was just hoping for the best I guess.
Its not the end of the world. My perspective on whats really important is a little different these days.
roe
1971 Plymouth Satellite
408/904 8 3/4 3.23 SG
|
|
|
Re: Would you run a hub with this damage?
[Re: roe]
#1159023
01/18/12 12:19 AM
01/18/12 12:19 AM
|
Joined: Jan 2003
Posts: 18,409
UPPER MICHIGAN, MARQUETTE COUN...
NITROUSN
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 18,409
UPPER MICHIGAN, MARQUETTE COUN...
|
Quote:
So like I say, I can understand him saying its too late and way past his known 7day policy, but was just hoping for the best I guess.
I would not be happy either. I also would not blame the seller. No doubt the shipper dropped them and caused the damage. That's the problem when someone cant inspect and refuse them as damaged when the shipper is on the porch.
|
|
|
Re: Would you run a hub with this damage?
[Re: NITROUSN]
#1159024
01/18/12 12:38 AM
01/18/12 12:38 AM
|
Joined: Jan 2005
Posts: 3,344
Central TX
roe
OP
master
|
OP
master
Joined: Jan 2005
Posts: 3,344
Central TX
|
Im not happy, but I can understand. But I also blame the parts company. Taping those two boxes together, with no kind of packing peanuts, bubble wrap, nothing....that was a disaster waiting to happen. If not damage to the items, then those heavy items flopping around inside the box might just tear right through it, which almost happened as well. Its not the end of the world though.  roe
1971 Plymouth Satellite
408/904 8 3/4 3.23 SG
|
|
|
Re: Would you run a hub with this damage?
[Re: RapidRobert]
#1159026
01/18/12 07:29 AM
01/18/12 07:29 AM
|
Joined: Feb 2004
Posts: 1,012
indiana
mcmopars
super stock
|
super stock
Joined: Feb 2004
Posts: 1,012
indiana
|
Quote:
Quote:
If not damage to the items, then those heavy items flopping around inside the box might just tear right through it, which almost happened as well.
Years ago I rec a small box w a fuel pump & the arm was sticking thru the side  . I dont think I could throw it against a brick wall & replicate that kind of damage but the shipper managed to do it. Dont remem if it was UPS or USPS (Post Office)
i was thinking the same thing,what did they do,throw them out of the plane?
|
|
|
Re: Update: Would you run a hub with this damage?
[Re: roe]
#1159028
01/18/12 01:23 PM
01/18/12 01:23 PM
|
Joined: Jan 2003
Posts: 16,376
dogdays
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 16,376
|
Looking at it closely I think I'd run it. The damage isn't on a structural part, it's more like a lip to keep the larger particles of dirt out. The support for the bearing race is intact, and the area for the seal to be presed in is at least 90% there. On this board most everyone is willing to throw money away to be "safe." Especially if it isn't their money. There are a lot of Nervous Nellies and I can't figure out if they worry about things that much why they aren't driving brand new cars. By the time a car gets to be 40 years old it has seen better days, don't tell me it isn't a lot more flexible than new. But people drive them and stick 500hp engines into them without much thought. Yet they get overwrought about some little thing that logically isn't going to affect anything. Years ago my cousins introduced me to a dirt track racer named Vern. He had an early Chevy II with a junkyard 327 and it ran hard. Talking to him about the engine he said that it had some of two or three different sets of pistons in it. I asked him were they about the same and he said no, some were 10.5:1 and some were 8.5:1 and they were just scattered in the block. Now no one here on this board would dare to run such a motor but it ran hard and didn't break for at least one season and probably more. He knew it's just a lump of cast iron, not a god or a person with feelings. My R.
|
|
|
|
|
