Re: Valve seal replacement...
[Re: tboomer]
#1119661
11/23/11 10:14 AM
11/23/11 10:14 AM
|
Joined: Nov 2004
Posts: 3,544 Syracuse,NY
CompWedgeEngines
master
|
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
Piece of cake Ted, if your pulling the springs to check, the seals take 10 seconds to pop off and put new ones on...you'll be fine...
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: Valve seal replacement...
[Re: tboomer]
#1119663
11/23/11 10:30 AM
11/23/11 10:30 AM
|
Joined: Dec 2009
Posts: 20,640 in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 20,640
in a cattle trailer down by th...
|
I bought the $50 Mancini tool and it works fine, you can't take all the springs off at once though, you'll have no way to keep the valves from dropping into the cylinder. I use a cheap compression gauge hose with the valve core removed to put compressed air in the cylinder. You can only do one cylinder at a time that way though.
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost conversion. 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
Re: Valve seal replacement...
[Re: 383man]
#1119666
11/23/11 10:41 AM
11/23/11 10:41 AM
|
Joined: Dec 2009
Posts: 20,640 in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 20,640
in a cattle trailer down by th...
|
That tool is really the cats behind, I just didn't want to spend $200 on a tool that wouldn't be used that often but it is pretty neat.
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost conversion. 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
Re: Valve seal replacement...
[Re: tboomer]
#1119670
11/23/11 11:11 AM
11/23/11 11:11 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Thanks for the detailed pics,Ron!! I agree with the guitar guy,too...200.00 is a lot to spend on a tool that may only be used once..I hope Lonemopar or bad1970dust has one..Those guys have everything and know thier stuff!
Think of it this way Ted... what does a set of head gaskets cost you and if you dont have a off engine spring compressor you would need to buy it too OR take them to a shop which cost
|
|
|
Re: Valve seal replacement...
[Re: tboomer]
#1119672
11/23/11 11:34 AM
11/23/11 11:34 AM
|
Joined: Jun 2003
Posts: 52,972 Romeo MI
MR_P_BODY
Master
|
Master
Joined: Jun 2003
Posts: 52,972
Romeo MI
|
Quote:
Point taken,Raff! But I am not going to race much next year..I have revived one of my old hobbies that is almost as much fun. I tell ya...It is a good thing the stores sell frozen turkeys....I struck out!!
I seen about 40 turkeys on my property when I was bow hunting... the wife got one in the spring hunt
|
|
|
Re: Valve seal replacement...
[Re: tboomer]
#1119673
11/23/11 11:36 AM
11/23/11 11:36 AM
|
Joined: Dec 2009
Posts: 20,640 in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 20,640
in a cattle trailer down by th...
|
There is always USPS flat rate boxes...It wouldn't cost much to ship it back and forth. Just sayin'.
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost conversion. 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
Re: Valve seal replacement...
[Re: Guitar Jones]
#1119674
11/23/11 03:23 PM
11/23/11 03:23 PM
|
Joined: Feb 2007
Posts: 6,295 U.S.
moparniac
master
|
master
Joined: Feb 2007
Posts: 6,295
U.S.
|
I use a 12pt socket deepwell.
Mopar Performance
|
|
|
Re: Valve seal replacement...
[Re: tboomer]
#1119676
11/23/11 05:31 PM
11/23/11 05:31 PM
|
Joined: Jan 2003
Posts: 19,363 Las Vegas
Al_Alguire
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 19,363
Las Vegas
|
Ted I have one of the old MP ones Mancini sold back in the day. Works fine for stock type shaft set ups. If you want I can send it to you just send me your mailing address.
"I am not ashamed to confess I am ignorant of what I do not know."
"It's never wrong to do the right thing"
|
|
|
|
|