Tranny dilemma~!
#1080133
09/22/11 12:40 AM
09/22/11 12:40 AM
|
Joined: Jan 2011
Posts: 4,785 Utah and Alaska
astjp2
OP
master
|
OP
master
Joined: Jan 2011
Posts: 4,785
Utah and Alaska
|
Ok, I am in the process of building a 4 speed tranny for my 68 Charger. I was able to find 3 extra 4 speeds, 2 A-body and 1 B-bodies. I now have 2 each 2.66, 1 each 2.45, and a 3.09 OD gear sets. It was suggested that I want the early A-body 3.09 gear set for my application. I am running an extremely mild 572 StageV Hemi and 3.55 gears and I don't have tires yet . So from the experience of the Moparts tribe, what should I do? Should I try and trade a gearset? Or do I want to run what I now have? If run what I have, which set and why? Thanks Tim
|
|
|
Re: Tranny dilemma~!
[Re: astjp2]
#1080134
09/22/11 02:52 AM
09/22/11 02:52 AM
|
Joined: Jul 2010
Posts: 3,502 SOUTH JERSEY
HEMIFRED
master
|
master
Joined: Jul 2010
Posts: 3,502
SOUTH JERSEY
|
I believe the 3.09 is a 6 cylinder gear and not that strong. plusw qa big drop to second. You have enough torque to sdtsay with a 2.45 or 2.46 there's little difference but a 4.10 gear would be the tickedt
home of the Sox and Martin Hemi Duster
|
|
|
Re: Tranny dilemma~!
[Re: astjp2]
#1080136
09/22/11 06:33 AM
09/22/11 06:33 AM
|
Joined: Dec 2009
Posts: 20,640 in a cattle trailer down by th...
Guitar Jones
Paddle faster! I hear banjo music!
|
Paddle faster! I hear banjo music!
Joined: Dec 2009
Posts: 20,640
in a cattle trailer down by th...
|
The 2.45 or 2.66 1st gear will be fine for you. Big cubes, lots of torque down low. The 3.09 was a 6 cylinder trans only to get that little thing moving. I don't think it was any weaker than the others per se but you won't need that steep of a 1st, plus as Fred said, there is a bigger spread between 1st and 2nd.
"Follow me the wise man said, but he walked behind"
'92 D250 Club Cab CTD, 47RH conversion, pump tweaks, injectors, rear disc and hydroboost conversion. '74 W200 Crew Cab 360, NV4500, D44, D60 and NP205 divorced transfer case. Rear disc and hydroboost coming soon! 2019 1500 Long Horn Crew Cab 4WD, 5.7 Hemi.
|
|
|
Re: Tranny dilemma~!
[Re: astjp2]
#1080137
09/22/11 05:16 PM
09/22/11 05:16 PM
|
Joined: Jan 2003
Posts: 25,796 Rio Linda, CA
John_Kunkel
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 25,796
Rio Linda, CA
|
I'm a big fan of the 3.09 low gear for the street, I use 3.23 gears and get the same launch as 2.66 with 3.91's.
Sure there's a big drop between 1-2 but torque covers that.
The INTERNET, the MISinformation superhighway
|
|
|
Re: Tranny dilemma~!
[Re: astjp2]
#1080138
09/22/11 06:03 PM
09/22/11 06:03 PM
|
Joined: Jan 2003
Posts: 8,668 Buford, GA
I_bleed_MOPAR
master
|
master
Joined: Jan 2003
Posts: 8,668
Buford, GA
|
3.55 gears? 8 3/4? I hope you don't plan on getting too crazy with the clutch and loud pedal. Tim
'71 Charger 383/727 '17 Challenger SXT (Wifeys car )
|
|
|
Re: Tranny dilemma~!
[Re: I_bleed_MOPAR]
#1080139
09/22/11 07:01 PM
09/22/11 07:01 PM
|
Joined: Jan 2003
Posts: 75,008 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,008
U.S.S.A.
|
Quote:
3.55 gears? 8 3/4? I hope you don't plan on getting too crazy with the clutch and loud pedal.
Tim
He's using a 23 spline , he'll probably blow that up before the rear
|
|
|
Re: Tranny dilemma~!
[Re: astjp2]
#1080146
09/25/11 04:36 PM
09/25/11 04:36 PM
|
Joined: Jan 2003
Posts: 75,008 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,008
U.S.S.A.
|
Quote:
Can you convert a 307 bearing case to a 308 bearing? TIm
Requires machining and maybe some welding because the 308 bore will hit the bolt holes .
Why do you want to switch to the larger bearing ?
|
|
|
Re: Tranny dilemma~!
[Re: astjp2]
#1080147
09/25/11 04:37 PM
09/25/11 04:37 PM
|
Joined: Jan 2003
Posts: 75,008 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,008
U.S.S.A.
|
Quote:
Nope Dana 60 with Dana 70 gears installed.....
Tim
Never heard of that combination ...
|
|
|
Re: Tranny dilemma~!
[Re: Guitar Jones]
#1080149
09/25/11 07:04 PM
09/25/11 07:04 PM
|
Joined: Jan 2003
Posts: 5,439 So Cal
Sinitro
master
|
master
Joined: Jan 2003
Posts: 5,439
So Cal
|
Quote:
The 2.45 or 2.66 1st gear will be fine for you. Big cubes, lots of torque down low. The 3.09 was a 6 cylinder trans only to get that little thing moving. I don't think it was any weaker than the others per se but you won't need that steep of a 1st, plus as Fred said, there is a bigger spread between 1st and 2nd.
The 3.09 1st gear was also used for some of the 318 cars..
Just my $0.02...
|
|
|
|
|