Quote: That's good to hear Josh. WHo did yours and is it custom fit?
I think the only other concern I have is at least 1 header tube the comes close enough to the block that I'ld be worried about it touching the diaper.
DRE made mine and there are two tubes that touch the diaper. He sewed Kevlar patches where the tubes touch and they protected the diaper real well. He didn't put one of the patches in the right spot and it burned one of the straps, but he fixed it for free. This is a full length Ray Barton pan, kickout, drag link tube, sight glass, external oil lines.
The straps are a real pain, especially the rear two. The front straps attach to brackets on the front header bolts, the rear are positioned between 5&7 and 6&8 so going to either header bolt interferes with the plugs. I drilled and tapped the header flange between the two cylinders for a stud that the bracket mounts to.
