Quote:

Greg...I was actually talking about the height that the frame rails would meet the tail panel. Does it line up with the structural rear cross member in the tail panel, or higher/lower. Just thinking about what I weld it to if it is not lined up with the inner crossmember.



I guess I got lucky. Mine lined up perfect. I did screw up when I welded my mounting plates over the access holes for the reverse lights. Totally my fault, the plates didn't need to be that big.

I recently helped a buddy with a 4-link back half on a 69 cuda fast back. He used a pre-welded Art Morrison kit, and it also lined up to the rear cross member and front rockers. Maybe I got lucky twice?

Later,

Greg

Last edited by gsmopar; 12/14/10 11:21 PM.