Quote: I thought of using some 4wheeler tie rod ends, but in my car absolutely no room. I dont think any car would have the room inside the car between the brake lever, and clutch lever.
I think I have like 45 bucks in heim joints is all. I threaded everything myself.
Kasey
I guess its hard to understand my poor english. I ment to use the rod ends you have and just fab and weld new exact the same brackets (like twins)at the z bar so you can mount the rod end between them with a bolt to go through first a bracket then the rod end and then another bracket and finaly the nut. That would make it very strong and it would stop it from wanting to twist the single bracket at the z-bar.
