Quote:

But
wouldn't a simpler deal in conjunction with longer
pushrods be, the "six-pack" rocker arms, shafts and hardware? Especially, if you have a complete
LOW or NO mileage set just laying around collecting dust! After all, they are the "service replacement" for the standard stamped-steel rocker factory rocker arms.





I've seen word on this site that those replacement rockers are no beefier than the regular production items.

But, your advice has merit pending ones budget and valvespring tension. I've gotten away with the regular production pieces with a few failures. Fortunately, the pushrod either punches through the rocker or the pushrod just fell to the side. Either way, the lifters never left their bores. And this was with the 933 valvesprings.

R.I.P.- Gary "Coop" Davis 02/09/68-05/13/04