So,here's a question. I'm going to confirm this before I take the plunge. I have 68 Coronet with 2.76 gears and it weighs around 3900 lbs with a driver. I have a stock 74 400 and 727 to go into the car. So, here's a few questions.

Would the K6400 Summit Cam give the off the line torque I need plus would it be too much cam for the compression ratio and would it be too agressive for my stock valve springs?

Secondly, would a 2k stall work well with this combo? I know one person mentioned the K6400 cam would work but, just wanted feedback from other others. Nothing against you Mr. Yucky just wanted to make sure before I took the plunge. I've read a little about the Ultradyne and PAW cams as well.