i could be mistaken Rick
but i dont think either header will allow for clutch hardware/z-bars..
a friend was just showing me his 69 dart 4spd
he used a hydralic throwout bearing..
some kit thats out there...fwiw...

i suspect your going to need to modify the wheel house and strech the wheel opening...
i know on a baracuda the rear wells are tiney...
fwiw..
cheers
cheapst.

365" Iron J heads,,3480lbs best 1.39 60ft on SS springs.10.54,124 mph ...6.67 1/8th et.average 60fts 1.46 w/ small cam &.063 no2 pill tagged & insured
[image][/image]