Quote:

Quote:

Quote:

Quote:

Yes, but it will not be pre-mixed with air. It will idle rich.



well I am running into just the oppisite problem. it is way lean on tip in and I found 2 rear bleeds completely clogged.

why don't you clean the bleeds, then snap the throttle?



I will once I have a chance to take the carb apart and blow everything out actually it was the main bleeds that were clogged but it doesn't matter, I was just curious to see what people think about the fuel flow with a clog.

I myself lean to the side of it either slowing the fuel flow of the circuit or stopping it totally. I posted this hoping one of the carb guru's the frequent the board would chime in. but I guess thats not going to happen guess you have to use their products to get any info. really tells me a lot about why they are on the board. I respect everyones opinion but I would really like to know what effect it has on a circuit. seems everyone is kind of divided on the issue.

well let's keep it bumped to the top and maybe they will eventually see it.

Light travels faster than the speed of sound,,,this is why some people seem bright untill you hear them speak.