Whats wrong no oil pressure when pre-oiling 400?

Print Thread

Re: Whats wrong no oil pressure when pre-oiling 400? [Re: wh23g3g] #473019 09/20/09 08:04 PM 09/20/09 08:04 PM
Joined: Feb 2004 Posts: 964 Nanaimo, B.C. GwaiiEagle Mannix
GwaiiEagle Mannix Joined: Feb 2004 Posts: 964 Nanaimo, B.C.	Easier to use the pan again when you don't use the paper. Just goo up the corners and ends. And use the pan with the heat crossover blocked off.

Entire Thread
Subject	Posted By	Posted
Whats wrong no oil pressure when pre-oiling 400?	wh23g3g	09/20/09 04:11 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	DirectSubjection	09/20/09 04:31 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	Runner	09/20/09 04:35 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	RapidRobert	09/20/09 04:38 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	wh23g3g	09/20/09 05:01 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	DirectSubjection	09/20/09 05:02 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	DaytonaTurbo	09/20/09 05:15 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	wh23g3g	09/20/09 05:45 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	DirectSubjection	09/20/09 05:52 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	RapidRobert	09/20/09 05:52 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	marks69	09/20/09 03:58 PM
Re: Whats wrong no oil pressure when pre-oiling 400?	70AARcuda	09/20/09 04:06 PM
Re: Whats wrong no oil pressure when pre-oiling 400?	64Post	09/20/09 04:07 PM
Re: Whats wrong no oil pressure when pre-oiling 400?	MoparforLife	09/20/09 04:19 PM
Re: Whats wrong no oil pressure when pre-oiling 400?	buildanother	09/20/09 05:18 PM
Re: Whats wrong no oil pressure when pre-oiling 400?	CHRGR69	09/20/09 07:45 PM
Re: Whats wrong no oil pressure when pre-oiling 400?	wh23g3g	09/20/09 09:27 PM
Re: Whats wrong no oil pressure when pre-oiling 400?	moparts	09/20/09 09:35 PM
Re: Whats wrong no oil pressure when pre-oiling 400?	wh23g3g	09/20/09 11:49 PM
Re: Whats wrong no oil pressure when pre-oiling 400?	GwaiiEagle	09/21/09 12:04 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	Shaker223	09/21/09 12:09 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	wh23g3g	09/21/09 02:37 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	64Post	09/20/09 04:32 AM
Re: Whats wrong no oil pressure when pre-oiling 400?	AndyF	09/21/09 12:02 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To