This shows wire routing, headliner teeth, black seam sealer, white sealer where the vapor barrier was stuck on, quarter window stuff, and the rear interior panel bracket that screws to the floor.
This little L shaped bracket screws to the floor and then the rear panel screws to the bracket to keep the bottom of the panel from moving around.
If you don't use this little bracket, make sure to fill up the screw hole in the floor with a little seam sealer or something to keep it from leaking.
The vapor barrier is made of clear plastic sheeting glued on with that white sealer. It doesn't seem like much, but it does make a noticeable difference in road noise & insulation. Vapor barriers should be installed behind each rear panel and each door panel.
