Quote:
if the rods were resized with ARP bolts, and you keep the revs under ~6k, I'd reuse stock rods in a heartbeat. I guess I'd trust them more than some of the cheaper offshored crap (i.e. eagle SIR's, etc)
the Eagle SIR rods are about the only rod i WOULDNT use in a stroker build thats going to make any steam at all, other than the stock rods.Those and the stock rods i would stay away from for sure.
As others have said, put a good rod in it
69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight
418 BPE factory replacement headed stroker, 565 lift solid cam
Best so far, low 10.30’s 1/4
1.41 best 60 foot
6.56 at 104.17
| 
