Used camshaft selection for stock short block 360

Print Thread

Re: Used camshaft selection for stock short block 360 [Re: 71valiant] #318422 05/15/09 07:07 PM 05/15/09 07:07 PM
Joined: Jan 2007 Posts: 3,695 nc E emarine01 master
emarine01 master E Joined: Jan 2007 Posts: 3,695 nc	We had a .030 over 360 9to1 comp with a erson 214 @ .050 with mid.400s lift in a pick up with a 2500 vert and 3.55s I think it was 108 on 104, air gap and 660 holley , ran good 2500 to 5500 in 4500 # 4x4

Entire Thread
Subject	Posted By	Posted
Used camshaft selection for stock short block 360	SANDYinNS Canada	05/15/09 02:40 AM
Re: Used camshaft selection for stock short block 360	goldmember	05/15/09 02:57 AM
Re: Used camshaft selection for stock short block 360	SANDYinNS Canada	09/24/09 12:11 PM
Re: Used camshaft selection for stock short block 360	RUNCHARGER	09/24/09 06:02 PM
Re: Used camshaft selection for stock short block 360	MR_P_BODY	05/15/09 04:02 AM
Re: Used camshaft selection for stock short block 360	goldmember	05/15/09 04:08 AM
Re: Used camshaft selection for stock short block 360	MR_P_BODY	05/15/09 04:36 AM
Re: Used camshaft selection for stock short block 360	goldmember	05/15/09 04:51 AM
Re: Used camshaft selection for stock short block 360	patrick	05/15/09 12:04 PM
Re: Used camshaft selection for stock short block 360	SANDYinNS Canada	05/15/09 12:21 PM
Re: Used camshaft selection for stock short block 360	patrick	05/15/09 01:06 PM
Re: Used camshaft selection for stock short block 360	SANDYinNS Canada	05/15/09 02:30 PM
Re: Used camshaft selection for stock short block 360	patrick	05/15/09 05:16 PM
Re: Used camshaft selection for stock short block 360	Paul_Fancsali	05/15/09 05:49 PM
Re: Used camshaft selection for stock short block 360	goldmember	05/15/09 06:35 PM
Re: Used camshaft selection for stock short block 360	71valiant	05/15/09 10:01 PM
Re: Used camshaft selection for stock short block 360	emarine01	05/15/09 11:07 PM
Re: Used camshaft selection for stock short block 360	thecarfarmer	05/15/09 11:24 PM
Re: Used camshaft selection for stock short block 360	SANDYinNS Canada	05/15/09 11:30 PM
Re: Used camshaft selection for stock short block 360	SANDYinNS Canada	05/16/09 11:40 AM
Re: Used camshaft selection for stock short block 360	7D9LRE	09/24/09 01:59 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To