Quote:

The only problem is the MP hyd cams with 108 lsa are over 290 degrees(I know they don't list them as such),so you can advance them all you want and not produce cylinder pressure with under 8 to 1 comp. The old standard comp 268high energy is ground on a 110lsa and most install it around 106lca,much closer to usable than the larger duration MP cams,IMO.



Your talking 290 advertised which is about a 246 at 50
then advance it to 102 CL then you still have enough
RPMs to play with, as you advance the cam you kill
the upper rpm range. If you use the 268(which I
am guessing its a 268 advertised) which would be
about a 228 at 50 and if you advance that you dont
have much for top end RPM... JMO BUT it will have
better low rpm cylinder pressure for torque