Run Stand - Starter set up - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Run Stand - Starter set up

Print Thread

Re: Run Stand - Starter set up [Re: clovis] #3184044 10/15/23 03:35 AM 10/15/23 03:35 AM
Joined: Aug 2003 Posts: 43,301 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,301 Bend,OR USA	Originally Posted by clovis Went down to the shop at lunch. Used about 3 feet of 1/0 wire from the battery to the starter (big starter) and a 6 gauge wire for the ground-crazy thing fired right up. Thank for the help. You need a bigger "ground" cable than the positive side, all the current in batteries travels, flows, out the negative side and returns to the battery through the circuit on the positive cable Hence the old adage that you can never have to many good grounds on D.C battery powered circuits Last edited by Cab_Burge; 10/15/23 03:37 AM. Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Entire Thread
Subject	Posted By	Posted
Run Stand - Starter set up	clovis	10/10/23 11:23 AM
Re: Run Stand - Starter set up	B1duster	10/10/23 02:34 PM
Re: Run Stand - Starter set up	clovis	10/10/23 03:01 PM
Re: Run Stand - Starter set up	rickseeman	10/10/23 03:34 PM
Re: Run Stand - Starter set up	Hemi_Joel	10/12/23 01:04 AM
Re: Run Stand - Starter set up	moparx	10/12/23 06:32 PM
Re: Run Stand - Starter set up	clovis	10/12/23 08:40 PM
Re: Run Stand - Starter set up	Cab_Burge	10/13/23 01:42 AM
Re: Run Stand - Starter set up	clovis	10/13/23 06:39 PM
Re: Run Stand - Starter set up	BANDIT	10/13/23 07:30 PM
Re: Run Stand - Starter set up	Hemi_Joel	10/13/23 08:51 PM
Re: Run Stand - Starter set up	moparx	10/14/23 05:53 PM
Re: Run Stand - Starter set up	Cab_Burge	10/15/23 07:35 AM
Re: Run Stand - Starter set up	clovis	11/10/23 04:48 AM
Re: Run Stand - Starter set up	BANDIT	11/12/23 06:45 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1