Cam position relative to lifter bore

Print Thread

Cam position relative to lifter bore #3110381 01/09/23 04:30 PM 01/09/23 04:30 PM
Joined: Mar 2005 Posts: 1,581 N/E, Michigan RATTRAP OP pro stock
RATTRAP OP pro stock Joined: Mar 2005 Posts: 1,581 N/E, Michigan	Is there a way to move the cam fwd in the block to get the cam lobes lined up center to the lifter bores? My cam looks like it needs to go about .125 to .25 fwd to line the lobes with the lifter bores

Entire Thread
Subject	Posted By	Posted
Cam position relative to lifter bore	RATTRAP	01/09/23 08:30 PM
Re: Cam position relative to lifter bore	madscientist	01/09/23 08:42 PM
Re: Cam position relative to lifter bore	INTMD8	01/10/23 04:11 AM
Re: Cam position relative to lifter bore	hemienvy	01/10/23 01:22 PM
Re: Cam position relative to lifter bore	Stanton	01/10/23 01:44 PM
Re: Cam position relative to lifter bore	Stanton	01/10/23 01:53 PM
Re: Cam position relative to lifter bore	RATTRAP	01/10/23 02:36 PM
Re: Cam position relative to lifter bore	Al_Alguire	01/10/23 06:07 PM
Re: Cam position relative to lifter bore	RATTRAP	01/11/23 11:50 AM
Re: Cam position relative to lifter bore	Al_Alguire	01/11/23 08:56 PM
Re: Cam position relative to lifter bore	RATTRAP	01/12/23 04:58 PM

Hop To