Cam position relative to lifter bore

Print Thread

Re: Cam position relative to lifter bore [Re: INTMD8] #3110514 01/10/23 09:22 AM 01/10/23 09:22 AM
Joined: Jun 2016 Posts: 910 Washington H hemienvy super stock
hemienvy super stock H Joined: Jun 2016 Posts: 910 Washington	I thought flat tappet lifters were offset from the lobe centerline to make them spin.

Entire Thread
Subject	Posted By	Posted
Cam position relative to lifter bore	RATTRAP	01/09/23 08:30 PM
Re: Cam position relative to lifter bore	madscientist	01/09/23 08:42 PM
Re: Cam position relative to lifter bore	INTMD8	01/10/23 04:11 AM
Re: Cam position relative to lifter bore	hemienvy	01/10/23 01:22 PM
Re: Cam position relative to lifter bore	Stanton	01/10/23 01:44 PM
Re: Cam position relative to lifter bore	Stanton	01/10/23 01:53 PM
Re: Cam position relative to lifter bore	RATTRAP	01/10/23 02:36 PM
Re: Cam position relative to lifter bore	Al_Alguire	01/10/23 06:07 PM
Re: Cam position relative to lifter bore	RATTRAP	01/11/23 11:50 AM
Re: Cam position relative to lifter bore	Al_Alguire	01/11/23 08:56 PM
Re: Cam position relative to lifter bore	RATTRAP	01/12/23 04:58 PM

Hop To