Not that exact p#, but I did a Denso swap a couple of years ago and I’m super happy with it. Volt guage is now locked between 12.5 and 13.8 at ALL times. I run my water pump and low speed fan after every run to get to 150 without charging between rounds and never have any issues.
I looked at Andy’s kit. It looks great by the way. Ultimately, all I had to do was cut my existing adjustment bracket, lengthen the piece (find some simple flat bar that was the exact dimension of the bracket) and re-angle the bolt-slot section. Location and main bracket are unaltered. 2nd picture is the stock bracket and my template to what I made it into. Been solid for a few years now.