JohnRR
My oil pressure-gauge only goes to 100psi so couldn't do other pressure tests.
Followed the TransGo manual to replace the stock servo spring and install the supplied one.
Don't recall the number of springs, imo the stock amount. This rebuild was spread out over roughly 3 years.
Transmission and OD-unit were build some 3 years ago and I just finished the valvebody mods right before taking the transmission in use.
I took a fair number of pics during the build but of course never enough because of greasy hands.


John Kunkel
Will have to look up the kit.nr on box in the garage.
It came with a manual from 17 sept 2014.
TFOD-HD2