Using shaft and pushrod oiling

Print Thread

Re: Using shaft and pushrod oiling [Re: dvw] #2794841 07/09/20 05:05 PM 07/09/20 05:05 PM
Joined: Jan 2003 Posts: 14,514 So. Burlington, Vt. F fast68plymouth I Live Here
fast68plymouth I Live Here F Joined: Jan 2003 Posts: 14,514 So. Burlington, Vt.	The 861 lifters have edge orifice oiling and the correct clocking of the oil feed hole....... so no restrictions to the top end in the pushrods are needed. 68 Satellite, 383 with stock 906’s, 3550lbs, 11.18@123 Dealer for Comp Cams/Indy Heads

Entire Thread
Subject	Posted By	Posted
Using shaft and pushrod oiling	Pockets	07/09/20 01:49 AM
Re: Using shaft and pushrod oiling	Cab_Burge	07/09/20 02:40 AM
Re: Using shaft and pushrod oiling	MR_P_BODY	07/09/20 02:40 AM
Re: Using shaft and pushrod oiling	dvw	07/09/20 10:25 AM
Re: Using shaft and pushrod oiling	fast68plymouth	07/09/20 09:05 PM
Re: Using shaft and pushrod oiling	Pockets	07/13/20 03:20 AM
Re: Using shaft and pushrod oiling	CSK	07/13/20 03:55 AM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 04:56 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 05:27 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 05:36 PM
Re: Using shaft and pushrod oiling	440Jim	05/28/21 06:24 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 07:06 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 07:18 PM
Re: Using shaft and pushrod oiling	AndyF	05/28/21 07:27 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 07:37 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 09:42 PM
Re: Using shaft and pushrod oiling	AndyF	05/28/21 09:57 PM

Hop To