Using shaft and pushrod oiling

Print Thread

Re: Using shaft and pushrod oiling [Re: Pockets] #2927734 05/28/21 03:27 PM 05/28/21 03:27 PM
Joined: Jan 2003 Posts: 31,060 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,060 Oregon	Originally Posted by Pockets Ok, so if that were the case, no oil gallery, would the hi pressure pin oiling of the 861 lifter not receive oil either? Correct. No pressure means no pressure. The 861 lifters will just have splash oiling if the gallery isn't drilled so no pressure for the pin and no pressure for the pushrod.

Entire Thread
Subject	Posted By	Posted
Using shaft and pushrod oiling	Pockets	07/09/20 01:49 AM
Re: Using shaft and pushrod oiling	Cab_Burge	07/09/20 02:40 AM
Re: Using shaft and pushrod oiling	MR_P_BODY	07/09/20 02:40 AM
Re: Using shaft and pushrod oiling	dvw	07/09/20 10:25 AM
Re: Using shaft and pushrod oiling	fast68plymouth	07/09/20 09:05 PM
Re: Using shaft and pushrod oiling	Pockets	07/13/20 03:20 AM
Re: Using shaft and pushrod oiling	CSK	07/13/20 03:55 AM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 04:56 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 05:27 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 05:36 PM
Re: Using shaft and pushrod oiling	440Jim	05/28/21 06:24 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 07:06 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 07:18 PM
Re: Using shaft and pushrod oiling	AndyF	05/28/21 07:27 PM
Re: Using shaft and pushrod oiling	fast68plymouth	05/28/21 07:37 PM
Re: Using shaft and pushrod oiling	Pockets	05/28/21 09:42 PM
Re: Using shaft and pushrod oiling	AndyF	05/28/21 09:57 PM

Hop To