Originally Posted By Bad340fish
If I were to run a stock tank and EFI I would use the Holley Hyrdomat, its not cheap but proven to work.

I made a customed baffled sump for my stock tank and while I have never lost fuel pressure its crazy how much I can hear the pumps change tone with slosh on a low tank. I run two Walboro 255lph mounted just behind the tank, they are a few inches above the outlets on the tank and I am going to try going a little lower to see if it helps.


For the D150 tank we used an Aeromotive phantom fuel pump. Yes it was $380 or so, but it is very well designed. The plastic ring surrounding the foam with the return dumping into it makes a nice source for picking up fuel.

The D150 tank is very long, we will see how it performs at low fuel levels here soon, but I expect it to work quite well.

https://youtu.be/DYVFhKN6baQ


https://youtu.be/T9meZpKN1qo

1972 Barracuda - 5.7L Hemi, T56 Magnum 6spd - https://www.facebook.com/GoodysGotaHemi
2020 RAM 1500
[img]https://i.imgur.com/v9yezP9.jpg[/img]