Separating lower control arm from ball joint stud

Print Thread

Re: Separating lower control arm from ball joint stud [Re: 11secaarcuda] #2447202 02/06/18 12:41 AM 02/06/18 12:41 AM
Joined: Dec 2013 Posts: 198 Stinnett, Tx R rumblebee4232 member
rumblebee4232 member R Joined: Dec 2013 Posts: 198 Stinnett, Tx	I use two 2lb sledge hammers hold one against one side control arm and smack the other side with the second hammer after you loosen the nut.. usually pops right loose and doesn't damage the boot..

Entire Thread
Subject	Posted By	Posted
Separating lower control arm from ball joint stud	11secaarcuda	02/03/18 03:47 PM
Re: Separating lower control arm from ball joint stud	fourgearsavoy	02/03/18 03:59 PM
Re: Separating lower control arm from ball joint stud	GoodysGotaCuda	02/03/18 04:39 PM
Re: Separating lower control arm from ball joint stud	CKessel	02/03/18 06:35 PM
Re: Separating lower control arm from ball joint stud	doctor_mopar	02/03/18 06:58 PM
Re: Separating lower control arm from ball joint stud	therocks	02/03/18 07:57 PM
Re: Separating lower control arm from ball joint stud	Ply72rr	02/03/18 10:34 PM
Re: Separating lower control arm from ball joint stud	John_Kunkel	02/03/18 11:26 PM
Re: Separating lower control arm from ball joint stud	Supercuda	02/04/18 12:31 AM
Re: Separating lower control arm from ball joint stud	FJR doc	02/04/18 02:05 AM
Re: Separating lower control arm from ball joint stud	therocks	02/04/18 03:58 AM
Re: Separating lower control arm from ball joint stud	DoctorDiff	02/04/18 04:38 AM
Re: Separating lower control arm from ball joint stud	moparx	02/04/18 04:30 PM
Re: Separating lower control arm from ball joint stud	Supercuda	02/04/18 05:44 PM
Re: Separating lower control arm from ball joint stud	poorboy	02/05/18 08:02 AM
Re: Separating lower control arm from ball joint stud	cruzin	02/05/18 09:03 PM
Re: Separating lower control arm from ball joint stud	ahy	02/06/18 03:02 AM
Re: Separating lower control arm from ball joint stud	rumblebee4232	02/06/18 04:41 AM
Re: Separating lower control arm from ball joint stud	11secaarcuda	02/06/18 01:02 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To