Offset grind 3.75 crank limit

Print Thread

Re: Offset grind 3.75 crank limit [Re: polyspheric] #2428854 01/04/18 01:20 PM 01/04/18 01:20 PM
Joined: Dec 2013 Posts: 403 Romulus, MI GTS340 mopar
GTS340 mopar Joined: Dec 2013 Posts: 403 Romulus, MI	Originally Posted By polyspheric Can't follow the text, they refer to "adding 1/2" to the stroke", using the stock rods (no offset), and 505" with 4.00" is just under 4.500" bore - not something you would do. They welded the journals to get to 4.250 stroke with the stock rods

Entire Thread
Subject	Posted By	Posted
Offset grind 3.75 crank limit	PorkyPig	01/01/18 07:14 PM
Re: Offset grind 3.75 crank limit	sgcuda	01/01/18 07:18 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 07:23 PM
Re: Offset grind 3.75 crank limit	Streetwize	01/01/18 08:03 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/01/18 09:19 PM
Re: Offset grind 3.75 crank limit	BradH	01/01/18 09:29 PM
Re: Offset grind 3.75 crank limit	toddinNH	01/02/18 07:45 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 09:22 PM
Re: Offset grind 3.75 crank limit	BradH	01/01/18 09:32 PM
Re: Offset grind 3.75 crank limit	sgcuda	01/01/18 09:52 PM
Re: Offset grind 3.75 crank limit	PorkyPig	01/02/18 04:14 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 09:46 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/02/18 05:45 PM
Re: Offset grind 3.75 crank limit	WHITEDART	01/03/18 06:49 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/02/18 10:22 PM
Re: Offset grind 3.75 crank limit	BradH	01/03/18 12:08 AM
Re: Offset grind 3.75 crank limit	gregsdart	01/02/18 11:04 PM
Re: Offset grind 3.75 crank limit	TRENDZ	01/03/18 04:47 AM
Re: Offset grind 3.75 crank limit	polyspheric	01/03/18 06:04 AM
Re: Offset grind 3.75 crank limit	pittsburghracer	01/03/18 06:34 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/03/18 06:55 PM
Re: Offset grind 3.75 crank limit	fast68plymouth	01/03/18 07:04 PM
Re: Offset grind 3.75 crank limit	A727Tflite	01/03/18 08:07 PM
Re: Offset grind 3.75 crank limit	Porter67	01/03/18 09:36 PM
Re: Offset grind 3.75 crank limit	A727Tflite	01/03/18 10:05 PM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 02:17 AM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 02:18 AM
Re: Offset grind 3.75 crank limit	A727Tflite	01/04/18 04:49 AM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 08:10 AM
Re: Offset grind 3.75 crank limit	A727Tflite	01/04/18 02:31 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/04/18 05:00 PM
Re: Offset grind 3.75 crank limit	GTS340	01/04/18 05:20 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/04/18 09:10 PM
Re: Offset grind 3.75 crank limit	PorkyPig	01/07/18 02:24 AM
Re: Offset grind 3.75 crank limit	Cab_Burge	01/07/18 07:48 AM
Re: Offset grind 3.75 crank limit	Sport440	01/07/18 08:25 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To