Offset grind 3.75 crank limit

Print Thread

Offset grind 3.75 crank limit #2427127 01/01/18 03:14 PM 01/01/18 03:14 PM
Joined: Aug 2006 Posts: 610 long time lurker, short time p... P PorkyPig OP mopar
PorkyPig OP mopar P Joined: Aug 2006 Posts: 610 long time lurker, short time p...	I have a new 440 3.75 crank that checked out good on journal size and taper. If I have it offset ground to use a 2.20 rod, what is the most stroke I should expect? Is there any option for an even smaller rod journal size that is still strong enough for a stroked 440? Last edited by PorkyPig; 01/01/18 03:20 PM.

Entire Thread
Subject	Posted By	Posted
Offset grind 3.75 crank limit	PorkyPig	01/01/18 07:14 PM
Re: Offset grind 3.75 crank limit	sgcuda	01/01/18 07:18 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 07:23 PM
Re: Offset grind 3.75 crank limit	Streetwize	01/01/18 08:03 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/01/18 09:19 PM
Re: Offset grind 3.75 crank limit	BradH	01/01/18 09:29 PM
Re: Offset grind 3.75 crank limit	toddinNH	01/02/18 07:45 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 09:22 PM
Re: Offset grind 3.75 crank limit	BradH	01/01/18 09:32 PM
Re: Offset grind 3.75 crank limit	sgcuda	01/01/18 09:52 PM
Re: Offset grind 3.75 crank limit	PorkyPig	01/02/18 04:14 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 09:46 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/02/18 05:45 PM
Re: Offset grind 3.75 crank limit	WHITEDART	01/03/18 06:49 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/02/18 10:22 PM
Re: Offset grind 3.75 crank limit	BradH	01/03/18 12:08 AM
Re: Offset grind 3.75 crank limit	gregsdart	01/02/18 11:04 PM
Re: Offset grind 3.75 crank limit	TRENDZ	01/03/18 04:47 AM
Re: Offset grind 3.75 crank limit	polyspheric	01/03/18 06:04 AM
Re: Offset grind 3.75 crank limit	pittsburghracer	01/03/18 06:34 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/03/18 06:55 PM
Re: Offset grind 3.75 crank limit	fast68plymouth	01/03/18 07:04 PM
Re: Offset grind 3.75 crank limit	A727Tflite	01/03/18 08:07 PM
Re: Offset grind 3.75 crank limit	Porter67	01/03/18 09:36 PM
Re: Offset grind 3.75 crank limit	A727Tflite	01/03/18 10:05 PM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 02:17 AM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 02:18 AM
Re: Offset grind 3.75 crank limit	A727Tflite	01/04/18 04:49 AM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 08:10 AM
Re: Offset grind 3.75 crank limit	A727Tflite	01/04/18 02:31 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/04/18 05:00 PM
Re: Offset grind 3.75 crank limit	GTS340	01/04/18 05:20 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/04/18 09:10 PM
Re: Offset grind 3.75 crank limit	PorkyPig	01/07/18 02:24 AM
Re: Offset grind 3.75 crank limit	Cab_Burge	01/07/18 07:48 AM
Re: Offset grind 3.75 crank limit	Sport440	01/07/18 08:25 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To