Offset grind 3.75 crank limit

Print Thread

Re: Offset grind 3.75 crank limit [Re: PorkyPig] #2427131 01/01/18 03:18 PM 01/01/18 03:18 PM
Joined: Jan 2005 Posts: 4,243 Charlotte, North Carolina sgcuda master
sgcuda master Joined: Jan 2005 Posts: 4,243 Charlotte, North Carolina	You can offset grind to a 3.90 stroke and use your favorite BBC rod. You could go a little more if you went with a sbc journal 2.100". I just sold a set of Manley aluminum rods exactly for that purpose. [image][/image]

Entire Thread
Subject	Posted By	Posted
Offset grind 3.75 crank limit	PorkyPig	01/01/18 07:14 PM
Re: Offset grind 3.75 crank limit	sgcuda	01/01/18 07:18 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 07:23 PM
Re: Offset grind 3.75 crank limit	Streetwize	01/01/18 08:03 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/01/18 09:19 PM
Re: Offset grind 3.75 crank limit	BradH	01/01/18 09:29 PM
Re: Offset grind 3.75 crank limit	toddinNH	01/02/18 07:45 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 09:22 PM
Re: Offset grind 3.75 crank limit	BradH	01/01/18 09:32 PM
Re: Offset grind 3.75 crank limit	sgcuda	01/01/18 09:52 PM
Re: Offset grind 3.75 crank limit	PorkyPig	01/02/18 04:14 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 09:46 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/02/18 05:45 PM
Re: Offset grind 3.75 crank limit	WHITEDART	01/03/18 06:49 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/02/18 10:22 PM
Re: Offset grind 3.75 crank limit	BradH	01/03/18 12:08 AM
Re: Offset grind 3.75 crank limit	gregsdart	01/02/18 11:04 PM
Re: Offset grind 3.75 crank limit	TRENDZ	01/03/18 04:47 AM
Re: Offset grind 3.75 crank limit	polyspheric	01/03/18 06:04 AM
Re: Offset grind 3.75 crank limit	pittsburghracer	01/03/18 06:34 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/03/18 06:55 PM
Re: Offset grind 3.75 crank limit	fast68plymouth	01/03/18 07:04 PM
Re: Offset grind 3.75 crank limit	A727Tflite	01/03/18 08:07 PM
Re: Offset grind 3.75 crank limit	Porter67	01/03/18 09:36 PM
Re: Offset grind 3.75 crank limit	A727Tflite	01/03/18 10:05 PM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 02:17 AM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 02:18 AM
Re: Offset grind 3.75 crank limit	A727Tflite	01/04/18 04:49 AM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 08:10 AM
Re: Offset grind 3.75 crank limit	A727Tflite	01/04/18 02:31 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/04/18 05:00 PM
Re: Offset grind 3.75 crank limit	GTS340	01/04/18 05:20 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/04/18 09:10 PM
Re: Offset grind 3.75 crank limit	PorkyPig	01/07/18 02:24 AM
Re: Offset grind 3.75 crank limit	Cab_Burge	01/07/18 07:48 AM
Re: Offset grind 3.75 crank limit	Sport440	01/07/18 08:25 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To