Offset grind 3.75 crank limit

Print Thread

Re: Offset grind 3.75 crank limit [Re: Al_Alguire] #2427256 01/01/18 05:32 PM 01/01/18 05:32 PM
Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually B BradH Taking time off to work on my car
BradH Taking time off to work on my car B Joined: Jan 2003 Posts: 15,439 Val-haul-ass... eventually	Originally Posted By Al_Alguire 2.100" SBC rod journals I was wondering about that, but I don't know if they're made long enough to work with an RB block the way the OP described it.

Entire Thread
Subject	Posted By	Posted
Offset grind 3.75 crank limit	PorkyPig	01/01/18 07:14 PM
Re: Offset grind 3.75 crank limit	sgcuda	01/01/18 07:18 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 07:23 PM
Re: Offset grind 3.75 crank limit	Streetwize	01/01/18 08:03 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/01/18 09:19 PM
Re: Offset grind 3.75 crank limit	BradH	01/01/18 09:29 PM
Re: Offset grind 3.75 crank limit	toddinNH	01/02/18 07:45 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 09:22 PM
Re: Offset grind 3.75 crank limit	BradH	01/01/18 09:32 PM
Re: Offset grind 3.75 crank limit	sgcuda	01/01/18 09:52 PM
Re: Offset grind 3.75 crank limit	PorkyPig	01/02/18 04:14 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/01/18 09:46 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/02/18 05:45 PM
Re: Offset grind 3.75 crank limit	WHITEDART	01/03/18 06:49 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/02/18 10:22 PM
Re: Offset grind 3.75 crank limit	BradH	01/03/18 12:08 AM
Re: Offset grind 3.75 crank limit	gregsdart	01/02/18 11:04 PM
Re: Offset grind 3.75 crank limit	TRENDZ	01/03/18 04:47 AM
Re: Offset grind 3.75 crank limit	polyspheric	01/03/18 06:04 AM
Re: Offset grind 3.75 crank limit	pittsburghracer	01/03/18 06:34 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/03/18 06:55 PM
Re: Offset grind 3.75 crank limit	fast68plymouth	01/03/18 07:04 PM
Re: Offset grind 3.75 crank limit	A727Tflite	01/03/18 08:07 PM
Re: Offset grind 3.75 crank limit	Porter67	01/03/18 09:36 PM
Re: Offset grind 3.75 crank limit	A727Tflite	01/03/18 10:05 PM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 02:17 AM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 02:18 AM
Re: Offset grind 3.75 crank limit	A727Tflite	01/04/18 04:49 AM
Re: Offset grind 3.75 crank limit	Porter67	01/04/18 08:10 AM
Re: Offset grind 3.75 crank limit	A727Tflite	01/04/18 02:31 PM
Re: Offset grind 3.75 crank limit	polyspheric	01/04/18 05:00 PM
Re: Offset grind 3.75 crank limit	GTS340	01/04/18 05:20 PM
Re: Offset grind 3.75 crank limit	Al_Alguire	01/04/18 09:10 PM
Re: Offset grind 3.75 crank limit	PorkyPig	01/07/18 02:24 AM
Re: Offset grind 3.75 crank limit	Cab_Burge	01/07/18 07:48 AM
Re: Offset grind 3.75 crank limit	Sport440	01/07/18 08:25 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To