Hi Justin,

Thnx for the reply. I will want to do this, probably over the summer. I already have a harness from a '93(?) 5.2, but I seem to recall that I busted one of the injector connectors while I was removing it. Again, my plan is to back it up with a clutch, so I'll be using the AX15 bellhousing, so I have provision for the crank position sensor.

Originally, I planned on putting an AX15 behind a Magnum headed 360, so I already have the 143 flywheel from a 3.9, knowing it would need to be rebalanced. (I already understood the flywheel balance factor on Magnum blocks is different than that of same displacement LA blocks.) I suppose I'll have to get the appropriate 5.2 or 5.9 flywheel to move forward with this planned project.

Thnx much,
Mike in FL