We were able to make only two pulls today, because the actual schedule isn't until tomorrow, but, the initial results are promising.

The first pull was just to check and watch everything, as the motor is brand new. We took the motor to 8000 RPM, and it made 1207HP.

The second, at last pull of the day, we re-torqued the heads, re-checked the lash, and did nothing else. I am not going to give the actual number, but, it was WAY over 1250HP @ 8800RPM.

We are thinking this thing will make every bit of 1310-1320HP tomorrow, after we start tuning it, in detail.

Thank you very much to those of you who have contacted me, to check the status of this motor. You guys kept me pumped up about doing this.

Off to bed, to catch some well-deserved zzzzzz's.