Machinists, removing pistons from press fit rods

Print Thread

Re: Machinists, removing pistons from press fit rods [Re: MR_P_BODY] #207543 01/29/09 06:29 PM 01/29/09 06:29 PM
Joined: Jan 2003 Posts: 21,079 Niles , Ohio T therocks oh wait.but hey.lets see.oh yeah.
therocks oh wait.but hey.lets see.oh yeah. T Joined: Jan 2003 Posts: 21,079 Niles , Ohio	My machinist can do it.He even pressed the pins out of my old 30 year old pistons with no problems.You need a good shop.Rocky Chrysler Firepower

Entire Thread
Subject	Posted By	Posted
Machinists, removing pistons from press fit rods	Von	01/29/09 02:46 PM
Re: Machinists, removing pistons from press fit rods	GODSCOUNTRY340	01/29/09 02:59 PM
Re: Machinists, removing pistons from press fit rods	Quicktree	01/29/09 03:06 PM
Re: Machinists, removing pistons from press fit rods	Moparnut426	01/29/09 03:12 PM
Re: Machinists, removing pistons from press fit rods	HemiRick	01/29/09 04:35 PM
Re: Machinists, removing pistons from press fit rods	MR_P_BODY	01/29/09 05:56 PM
Re: Machinists, removing pistons from press fit rods	therocks	01/29/09 10:29 PM
Re: Machinists, removing pistons from press fit rods	64dodge440	01/30/09 01:10 AM
Re: Machinists, removing pistons from press fit rods	SSDA3426	01/30/09 01:31 AM
Re: Machinists, removing pistons from press fit rods	Defbob	01/30/09 12:25 PM
Re: Machinists, removing pistons from press fit rods	mopardamo	01/30/09 02:44 PM
Re: Machinists, removing pistons from press fit rods	CompWedgeEngines	01/30/09 02:56 PM
Re: Machinists, removing pistons from press fit rods	Bad340fish	01/31/09 01:11 AM
Re: Machinists, removing pistons from press fit rods	Von	01/31/09 04:43 AM
Re: Machinists, removing pistons from press fit rods	Bad340fish	01/31/09 05:36 AM
Re: Machinists, removing pistons from press fit rods	360view	01/31/09 02:51 PM

Hop To