Machinists, removing pistons from press fit rods

Print Thread

Re: Machinists, removing pistons from press fit rods [Re: Von] #207540 01/29/09 11:12 AM 01/29/09 11:12 AM
Joined: Mar 2007 Posts: 12,008 Finally a HUSKER again Moparnut426 I Live Here
Moparnut426 I Live Here Joined: Mar 2007 Posts: 12,008 Finally a HUSKER again	You should be able to machine them off without taking off the rods. Chuck them up in the mill and just swing the rod out of the way.

Entire Thread
Subject	Posted By	Posted
Machinists, removing pistons from press fit rods	Von	01/29/09 02:46 PM
Re: Machinists, removing pistons from press fit rods	GODSCOUNTRY340	01/29/09 02:59 PM
Re: Machinists, removing pistons from press fit rods	Quicktree	01/29/09 03:06 PM
Re: Machinists, removing pistons from press fit rods	Moparnut426	01/29/09 03:12 PM
Re: Machinists, removing pistons from press fit rods	HemiRick	01/29/09 04:35 PM
Re: Machinists, removing pistons from press fit rods	MR_P_BODY	01/29/09 05:56 PM
Re: Machinists, removing pistons from press fit rods	therocks	01/29/09 10:29 PM
Re: Machinists, removing pistons from press fit rods	64dodge440	01/30/09 01:10 AM
Re: Machinists, removing pistons from press fit rods	SSDA3426	01/30/09 01:31 AM
Re: Machinists, removing pistons from press fit rods	Defbob	01/30/09 12:25 PM
Re: Machinists, removing pistons from press fit rods	mopardamo	01/30/09 02:44 PM
Re: Machinists, removing pistons from press fit rods	CompWedgeEngines	01/30/09 02:56 PM
Re: Machinists, removing pistons from press fit rods	Bad340fish	01/31/09 01:11 AM
Re: Machinists, removing pistons from press fit rods	Von	01/31/09 04:43 AM
Re: Machinists, removing pistons from press fit rods	Bad340fish	01/31/09 05:36 AM
Re: Machinists, removing pistons from press fit rods	360view	01/31/09 02:51 PM

Hop To