Machinists, removing pistons from press fit rods

Print Thread

Re: Machinists, removing pistons from press fit rods [Re: Von] #207547 01/30/09 10:44 AM 01/30/09 10:44 AM
Joined: Sep 2005 Posts: 1,328 St. Louis, MO mopardamo pro stock
mopardamo pro stock Joined: Sep 2005 Posts: 1,328 St. Louis, MO	Hello, Done it a few times. Heat the rod end and press out. Heat the rod end and cool the pin upon assembly just like was said. No issues. Damon

Entire Thread
Subject	Posted By	Posted
Machinists, removing pistons from press fit rods	Von	01/29/09 02:46 PM
Re: Machinists, removing pistons from press fit rods	GODSCOUNTRY340	01/29/09 02:59 PM
Re: Machinists, removing pistons from press fit rods	Quicktree	01/29/09 03:06 PM
Re: Machinists, removing pistons from press fit rods	Moparnut426	01/29/09 03:12 PM
Re: Machinists, removing pistons from press fit rods	HemiRick	01/29/09 04:35 PM
Re: Machinists, removing pistons from press fit rods	MR_P_BODY	01/29/09 05:56 PM
Re: Machinists, removing pistons from press fit rods	therocks	01/29/09 10:29 PM
Re: Machinists, removing pistons from press fit rods	64dodge440	01/30/09 01:10 AM
Re: Machinists, removing pistons from press fit rods	SSDA3426	01/30/09 01:31 AM
Re: Machinists, removing pistons from press fit rods	Defbob	01/30/09 12:25 PM
Re: Machinists, removing pistons from press fit rods	mopardamo	01/30/09 02:44 PM
Re: Machinists, removing pistons from press fit rods	CompWedgeEngines	01/30/09 02:56 PM
Re: Machinists, removing pistons from press fit rods	Bad340fish	01/31/09 01:11 AM
Re: Machinists, removing pistons from press fit rods	Von	01/31/09 04:43 AM
Re: Machinists, removing pistons from press fit rods	Bad340fish	01/31/09 05:36 AM
Re: Machinists, removing pistons from press fit rods	360view	01/31/09 02:51 PM

Hop To