Wanted to provide feedback on getting my lights to work again. While I had the fuse box removed from the dash, I cleaned it w/ electronic spray cleaner & put a soft wire brush to it. Ruederunner gave me the idea of the fuses; they were HF specials. I started field testing some of them & discovered they weren't passing all the current through. Went to NAPA, bought some real fuses & installed. While there, I purchased an electronic turn signal flasher & installed. Last, checked the bulkhead connector & found the one side got knocked loose on the master cylinder install-human interference on that one. Put power back on & the lights work; a little brighter & faster I might say.
Thanks again to the repliers for the items to check.