Mine looks close to the "rear sump pickup" in the last pic. I will measure the length of the "bends" tomorrow to help confirm. How I ended up with a FS pan and a RS pickup I have no idea. On the crossmember as said (& I mistakenly alluded to wrongly) you do not need a crossmember unless you have a hyd clutch setup and are going to a 727 & probably also a non hydro stick (I was thinking of my setup/conversion plans). On the hyd clutch setups (like my /6 & future 451 will have) the rear mount(s)s bolt to either side of the bellhousing & no crossmember tho one will bolt in.