Would like to know first what kinda of power are we looking at here, as that kinda tells us kinda the speeds you will be braking from and how hard/deep you will be braking from, next what are your goals at the beginning of the project, and then what at the end? The 1.06" TB gives me a idea what level you are on, just want to make sure advice is in sync with your thinking. work

Quick thoughts:
1. Add power later
2. Forget LCA reinforcement
3. Go square on tires
4. Go two steps higher on TB for starts
5. Go with the least investment Discs you currently own, cool/duct the heck out of them, drive them until you get seat time and they start to fade, THEN upgrade, same for rears but after upgrading fronts, repeat
5.1 definitely add adjustable brake bias, it will change with every other change you make
6. Ditch ANY weight you can, its really cheap
7. Get seat time, ecen with a slant six
8. you can never go too big on tires, 18's have a better future
9. Kissing the Beauty queen in the winners circle will take time.

Last edited by jcc; 12/13/15 02:23 AM.
Reality check, that half the population is smarter then 50% of the people and it's a constantly contested fact.