Well about a month ago I posted that I finally had the wagon running after 2 yrs of work.
Today I was able to get it out for the last T&T at Magnolia Raceway. Its a local 1/8 mile track.
Ran 7.09, 7.09, 7.13 & 7.11(shifted between 5600-5800). Only played w/the rear suspension(caltrac and shocks)some.
What I found was the car launches well but is a hand full as it goes down track.
I believe this to be a combo of the stock spec alignment, old school skinny fronts and 90/10 front shocks.
Didn't mess w/the carb just hoped the car would make a full pass. I plan on converting to E85 over the winter so my main concern today was how would it launch and travel down the track.

The engine a 512 based on a 400 block. The stroker is a 440 Source kit. 4.25 stroke, I beam rods 6.535 and Diamond flat tops.
It has Eddy Performer RPMs 84cc that Nick at Compuflow cleaned up, small Comp Cam xs282s, M1 intake and a Biggs 950 Holley I ran on my Cuda, auto w/Griner vb, PTC convertor 3500-3800 stall, dana with 4.10.
This is a street strip car for me so I'm pretty happy.